Table of Contents
Drywall Costs Drywall installation costs $1,832, with a typical range of $1,004 and $2,877. This translates into a price of $1 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.
How do I estimate a drywall job?
Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you’re using 4-by-8 sheets) or by 48 (if you’re using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.
How much does it cost to drywall a 2000 square foot house?
If you have about 2,000 sq. ft. of wall space, your total price for new drywall will be about $3,500-4,800.
How much does it cost to drywall a 1000 sq ft basement?
Average Cost to Drywall a Basement by Basement Size
| Average Cost to Drywall a Basement By Size | |
|---|---|
| Cost to Drywall a 1,000 square foot Basement | Total Cost |
| Low Cost x 1,480 square feet | $2,740 |
| Average Cost x 2,220 square feet | $8,880 |
| High Cost x 2,960 square feet | $17,000 |
How long does it take to drywall a 12×12 room?
Drywall installation takes as little as one day and as long as four weeks, including the time it takes to prep and clean up debris. The amount of time depends on the size of the project, framing needs, and level of finish.
How much does it cost to hire someone to mud and tape drywall?
Cost to tape and mud drywall To finish the drywall, it costs $1 to $1.65 per square foot. This works out to between $30 and $60 per pre-manufactured panel that’s hung on the studs and finished with texture.
What is the hourly rate for drywall installation?
Hourly Wage for Drywall Installer Salary
| Percentile | Hourly Pay Rate | Location |
|---|---|---|
| 25th Percentile Drywall Installer Salary | $20 | US |
| 50th Percentile Drywall Installer Salary | $24 | US |
| 75th Percentile Drywall Installer Salary | $28 | US |
| 90th Percentile Drywall Installer Salary | $33 | US |
How much does a 4×8 sheet of drywall cost?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot. For walls and ceiling for a 200 square-foot room, you can expect to pay $300 to $500.
How much does it cost to drywall a 1500 square foot house?
Our page on Average Drywall Installation Cost & Prices shows that the cost to drywall a house per square foot is roughly $1.30 – $4.00 per square foot.
| Average Cost to Drywall a House by House Size | |
|---|---|
| Cost to Drywall a 1000 sq ft House | Total Cost |
| Average x 4140 | $9,150 |
| High x 4700 | $14,800 |
| Cost to Drywall a 1500 sq ft House | |
How many pounds is a box of drywall mud?
All-Purpose 48 Lb. Box.
How many sheets of drywall do I need for 1000 square feet?
After you find the square footage of drywall needed, simply divide by the square footage of the sheet size you will be using to find the number of sheets needed. For example, if your wall surface is 1000 square feet and you’re using 4′ x 8′ sheets, then the number of sheets needed is 1000 / 32, or 31.25.
How much does it cost to Sheetrock a room?
The national average materials cost to install sheetrock is $0.53 per square foot, with a range between $0.45 to $0.61. The total price for labor and materials per square foot is $1.85, coming in between $1.63 to $2.06. A typical 500 square foot project costs $922.92, with a range of $816.36 to $1,029.48.6 days ago
How long after drywall is house finished?
Interior finishing – This is when the inside of your house starts to look like a house, with the drywall and most of the carpentry completed. Expect about two months. Click to see full answer.
How do you Drywall a ceiling by yourself?
- Step 1: Find the Joists. If you want to hang new drywall over an old ceiling, you first need to find the joists.
- Step 2: Measure the Ceiling Length & Width.
- Step 3: Cut the Drywall.
- Step 4: Label Drywall.
- Step 5: Pre-Drill Screws.
- Step 6: Use a Dimple Bit.
- Step 7: Add Support to the Wall.
- Step 8: Hoist Drywall to Joist.
How many days does it take to drywall a room?
A crew of three guys can put the board up in an average size house in three days. Usually that’s all they do, and another crew comes in to tape. This stage will take four days to a week to finish ready for priming, so the whole job from bare studs to done takes less than two weeks.
How many gallons of joint compound do I need?
How much drywall mud do I need for texture? The amount of joint compound you’ll need for texture depends on the type of drywall texture style, including: Knockdown: 1 gallon per 50 to 75 square feet. Light textures: 1 gallon per 100 to 150 square feet.
Is there a difference between sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How much drywall can man hang in 8 hours?
Each man should be able to hang 35 to 40 sheets an eight hour day.
How much does it cost to drywall a 2500 square foot house?
Cost to Drywall a Whole House
| House Size | Drywall Square Feet | Price |
|---|---|---|
| 1,500 | 5,000-6,500 | $5,000 – $19,500 |
| 2,000 | 6,500-7,900 | $6,500 – $23,700 |
| 2,500 | 7,900-9,400 | $7,900 – $28,200 |
| 3,000 | 8,000-10,000 | $8,000 – $30,000 |
How much does a 5 gallon bucket of drywall mud cover?
One 5 gal bucket usually does 10 sheets.
How much should I charge to hang and finish drywall?
On average, it costs between $0.24 and $2.25 per square foot to hang sheetrock, which includes labor. Finishing costs range between $1.00 and $1.65 per square foot on average. In total, prepare to pay between $1.30 and $4.00 per square foot to have sheetrock hung and finished.6 days ago
How much does it cost to drywall a 1000 square foot house?
For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
