Table of Contents
Small systems which are operated by manual labor and gravity flow can cost as little as $50 and irrigate a small garden. Larger systems requiring pumps and permanent piping can cost from $1800 to $2500 an acre. All irrigation systems will cost you time to operate and manage.
What does it cost to irrigate an acre?
Cost to Install Sprinkler Systems Irrigated Area (Square Feet) Approx. Lot Size Starting Price 3500 – 5000 sq ft Regular City Lot (.15-.2 Acre) $4475 – $4835 5000 – 7000 sq ft Medium to Large City Lot (.2-.3 Acre) $4835 – $5335 7000 – 12000 sq ft .3 to .4 Acre Lot $5335 – $6050 12000 – 15000 sq ft Half Acre Lot $6050 – $6445.
How much does a 40 acre pivot cost?
“A 40-acre system sells for about $11,500 not including cost of installation or the well. That’s about 35% less than the price of a new comparable conventional system and about the same as a good used center pivot system,” says Dobbs. “A 10-acre system sells for about $7,000.
How much does it cost to put in a pivot irrigation system?
Standard 160 acre system and end gun with actual irrigated area of 132 acres installed at a cost of $48,000 with a power and water source and connecting equipment cost of $30,000.
What is the cost of drip irrigation per acre?
Installation cost depends on several factors. For crops that are planted in 6X6 pattern drip irrigation cost only about Rs. 35,000 per acre. Nowadays the cost of drip irrigation in India varies from 45000 to 60000 Indian rupees per acre.
How much does it cost to spray a field?
First, let’s start with some simple math, the average cost of a fungicide is $10 to $15 per acre, the cost of application is $12 to $15 per acre for aerial and $5 to $8 per acre for ground. This brings the total cost of spraying the fungicide to between $15 and $30 per acre.
Which irrigation system is costly?
The cost of surface irrigation is the the cultivation cost like making ridges and furrows that too seasonal. But the cost of micro-irrigation has and initial investment and then O and M cost may be 5-8 % annually.
How many gallons of water does a pivot use?
This example shows the minimum water supply rate for a center pivot equipped with high pressure impact sprinklers should be approximately 772 gallons per minute (656/0.85). The minimum system flow rate for a center pivot with low pressure spray nozzles at truss rod height would be 690 gpm (656/0.95).
How much electricity does a pivot use?
Agricultural energy efficiency tour: replacing inefficient irrigation systems Center Pivot Pumping Rate (gpm) Electricity Usage (kWh/yr) Full Circle 1,200 65,099 1,050 36,631 3/4 Circle 1,200 40,990 1,050 38,297.
How many acres does a center pivot cover?
Center pivots are typically less than 500 meters (1,600 ft) in length (circle radius) with the most common size being the standard 400-meter (1⁄4 mi) machine, which covers about 50 hectares (125 acres) of land.
How long can a center pivot be?
The distance between towers is called a span. The length of the span can vary between 130 and 200 feet. The typical pipe on the pivot has an outside diameter of 65/8 inches with a wall thickness of 0.109 inches. The pipe and the towers are typically galvanized to prevent corrosion.
How long is a center pivot section?
The most common center pivot uses a 6-inch pipe, is a quarter-mile long (1320 feet), and irrigates the circular portion (126 acres) of a quarter section (160 acres), or roughly 79% of the entire field.
What is a pivot irrigation system?
Pivot irrigators, also known as center-pivot or circle irrigators, are rotating machines that water crops using sprinklers. The irrigation method is highly efficient and irrigates crops in a circular area around the system’s pivot point.
How much water is required to irrigate an acre?
One cusec of water flowing for one hour is equal to 62.4 Ib X 60 X 60 = 22464 gallons, 101 tons, or one- hectare inch (28.37 liter X 60 X 60 = 101952 liters or one-acre inch.
What are the 4 types of irrigation?
The four methods of irrigation are: Surface. Sprinkler. Drip/trickle. Subsurface.
Why is drip irrigation expensive?
Most conventional drip irrigation systems are designed to operate the drippers at a pressure of at least 1 bar. To maintain this pressure requires energy, which constitutes the main capital expense in off-grid drip irrigation systems, and the primary recurring cost in on-grid systems.
How much does it cost to have a field crop dusted?
On average, officials said crop dusting costs between $15 to $25 per acre. Spraying corn fungicide, for example, is on the top end of the scale.
How much do custom sprayers make?
The average salary for a custom applicator is $18.81 per hour in the United States. 363 salaries reported, updated at February 12, 2022.
How much does herbicide cost per acre?
Weed Control Service Cost by Type of Herbicide The average cost of chemical weed killers is $30 to $120 per ¼ acre.
How big of a irrigation pond do I need?
A good place to start is with ten acre-feet of irrigation water. For a pond to provide this volume, you will need two acres of land and an average pond depth of seven feet. A pond of this depth and size will also account for any potential losses due to evaporation.
Which is the simplest and cheapest source of irrigation?
Drip irrigation is the cheapest and simplest mode of irrigation.
Which type of irrigation is more costly for farmers?
The sprinkler irrigation method is one of the most costly irrigation for farmers. sprinkler irrigation helps in conserving water are water is sprayed directly to the required plants there is no loss of water through seepage or evaporation.
