Table of Contents
Average Cost of Drywall by the Sheet The average price of drywall and sheetrock is $15 per four-foot by eight-foot panel. The prices can range from $12-$20 per panel depending on where you live and where you are purchasing from. This translates into a cost of about $0.40-$0.65 per square foot of drywall.
How much does a 4×8 sheet of drywall cost?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot. For walls and ceiling for a 200 square-foot room, you can expect to pay $300 to $500.
What is the average cost to hang drywall?
People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
Should you hang Sheetrock vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
How much does a 4×8 sheet of 1/2 inch drywall weigh?
A conventional 1/2-inch thick sheet of drywall measuring 4 x 8 feet weighs around 57 pounds. According to drywall maker USG, a 4 x 8-foot sheet of Sheetrock brand UltraLight Panel weighs 13 pounds less, for a total of 44 pounds.
How much should I charge to hang and finish drywall?
On average, it costs between $0.24 and $2.25 per square foot to hang sheetrock, which includes labor. Finishing costs range between $1.00 and $1.65 per square foot on average. In total, prepare to pay between $1.30 and $4.00 per square foot to have sheetrock hung and finished.
How much does it cost to hang and finish drywall per sheet?
Average Cost to Hang and Finish Drywall Per Sheet The average cost to hang and finish drywall is $65 for a 4′ x 8′ sheet and $100 for a 4′ x 12′ sheet. The number of panels you need depends on the dimensions of the room, particularly the height.
How do I estimate a drywall job?
To determine how many pieces you will need, take the total square footage of the walls and ceilings that need drywall (let’s say it’s 650 sq. ft.) and divide it by either 32 or 48. 650/32=20.31, or 21 sheets of drywall.
How much gap should be between sheets of drywall?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.
Should sheetrock touch the floor?
3 Answers. Drywall should definitely not touch concrete as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth. 3/8″ should be sufficient – your prop up plan is not only appropriate, but a common technique used by drywallers.
Can you hang drywall on 24 centers?
Always use 5/8 on 24″ centers. You can rent a drywall lift from “The Big Boxes” for about $30 a day so you won’t kill your back trying to lift & shift the rock. If you use 1/2 it will sag eventually. When it sags you will get the “Amphitheater look” between each joist.
How much does a 12 foot sheet of 1/2 inch drywall weigh?
Using lbs/ft2 calculations for 48” wide sheets Lbs/ft 2 12 ft long 1/2” Standard 1.6 76.8 5/8” Standard 2.2 105.6 1/2” Lightweight 1.25 70 5/8” Lightweight 1.65 92.4.
How much does a 12 foot sheet of 5/8 inch drywall weigh?
The Weight of a Sheet of Drywall A 5/8″ sheet of drywall, which is used to achieve fire ratings, typically weighs a little over 70 pounds.
How much does a 8 foot sheet of 1/2 inch drywall weigh?
Standard Drywall One-half-inch board weighs 54.4, 68 or 81.6 pounds for sheets of eight, 10 or 12 feet.
How much drywall can man hang in 8 hours?
Each man should be able to hang 35 to 40 sheets an eight hour day.
How much does it cost to drywall 1000 square feet?
For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
How long should it take to hang drywall?
Estimated Time Two pros can typically cover a 12-by-16-foot room in about an hour. To work that fast takes practice and a few specialized tools. But hanging drywall is not just about speed.
How many sheets of drywall do I need for 1000 square feet?
After you find the square footage of drywall needed, simply divide by the square footage of the sheet size you will be using to find the number of sheets needed. For example, if your wall surface is 1,000 square feet and you’re using 4′ x 8′ sheets, then the number of sheets needed is 1,000 ÷ 32, or 31.25.
Why is drywall so expensive?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. You don’t want to set up your construction loan and then find out prices have skyrocketed for the building materials.
How many pounds is a box of drywall mud?
All-Purpose 48 Lb. Box. All-Purpose Joint Compound provides excellent coverage in an easy-to-apply formula. All-purpose ready mix joint compound is suitable for both taping and finishing of wallboard joints, corner trims, and fasteners.
How much does it cost to drywall a 2000 square foot house?
If you have about 2,000 sq. ft. of wall space, your total price for new drywall will be about $3,500-4,800. This estimate is for simple rectangular rooms, without any complex architectural details, multiple corners or any other obstructions that would need to be worked around.
