Table of Contents
The average cost of decking material ranges between $20 and $45 per square foot. There are three common choices of materials: wood, composite, and plastic. Pressure-treated wood costs between $15 and $20 per square foot and $2 to $5 for decking boards.
How much does it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
How much does it cost to build a 10×20 deck?
2. Deck Cost Estimator by Size Dimensions Total Square Feet Average Price Range 10×20 200 $8,000 – $12,000 12×20 240 $9,600 – $14,400 16×16 256 $10,240 – $15,360 14×20 280 $11,200 – $16,800.
How much should a deck cost per square foot?
According to HomeAdvisor, as of 2020 the cost of most decks ranged between $4,153 and $11,219, with $7,686 being the national average cost of a new deck. The total average cost per square foot was between $30 to $60 with labor and materials each consuming about 50% of that budget.
How much does a 500 square foot deck cost?
Deck Cost Per Square Foot Deck Size Average Price Price Range (Low to High) Less than 200 sq.ft. $4,836 $2,888 – $6,870 Between 200 – 500 sq.ft. $8,142 $5,169 – $11,139 More than 500 sq.ft. $14,504 $8,532 – $20,605.
How much should a new deck cost?
The average price range of building a new deck in the United States can be anywhere between $4,000 and $11,000. Including materials and labor, a standard deck will cost roughly $30-$60 per square foot. That means, for a standard 14 x 20 foot deck, you can expect to pay around $6,000.
How many hours does it take to build a deck?
A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level. A professional team can usually have the project done in a week or less.
How much does a deck add to home value?
Deck Improvements Can Recoup 100% of Their Cost While many home renovation projects only recoup anywhere from 50% to 80% of their cost, multiple studies have estimated that the ROI for patios and decks can exceed 100% based on the size and materials used.
Is it cheaper to build your own deck?
When you construct a basic deck with the least expensive lumber on the market, you will probably pay between $8-10 for every square foot of area if you build it yourself. But, if you hire someone to build it, you could end up paying as much as $25 per square foot.
How much did your deck cost?
The key factor in the total cost of installing a deck is the deck size, of course, and the average cost is $4,000 to $6,500. Building a small deck typically costs around $4,000 on average, a mid-sized deck’s price is around $7,000, whereas the average price for a large deck is from $9,000 or more.
How much does it cost to replace a 12×12 deck?
An average 12×12 deck that consists of 144 square feet costs between $720 and $1,440 to remove.
How much does it cost to cover a deck?
Adding any deck covering or enclosure will typically cost between $1,000 – $10,000. Adding a covered roof to your deck will typically cost between $3,000 – $10,000.
How much does it cost to frame a deck?
On average, the cost to frame a deck is between $6-10 a square foot, including material. Joist size and span play an important factor in both material and labour cost to frame a deck. A larger deck with standard joist dimensions with less waste will cost less to frame.
What is a good size deck for entertaining?
A small deck intended for holding a round dining table should measure at least 144 square feet. However, the average size of a deck should range between 300 and 400 square feet.
What material do I need for a 12×12 deck?
You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
Why are decks so expensive?
Labor and materials are the primary factors that impact the costs in building a deck. Everything up to installing floorboards will have a specific cost that can be determined during the planning stages. Railings can add slightly to overall costs or can be ornamental and therefore add a chunk of change to the price.
How do I build a budget deck?
5 Tips for Building a Deck on a Budget Scale Down Your Design. If you are planning a multi-level deck with a screened gazebo at the top, let’s face it, it won’t be cheap no matter what you do. Build in Off-season. Go With Wood. Less Customization. Do Cheap Without Sacrificing Quality.
Is a deck more expensive than a patio?
In short, patios are usually cheaper than decks. For instance, since a patio is placed directly on the ground, you’ll want to choose a space that is level. Patios may not be the best choice for uneven ground because the cost to create a level foundation can double or triple the cost of the actual addition.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
