Table of Contents
How much does it cost to put up split rail fence?
With professional installation, a split rail fence will cost you from $12 to $30 or more per linear foot, $1,200 to $3,000 per 100 feet, and $9,960 to $24,900 to enclose an acre.
What is the best wood to use for a split rail fence?
Wood Types When it comes to the type of wood used to make your wood split rail fence, Western Red Cedar and Yellow Pine are the best options on the market.
Are split rail fences good for dogs?
Split rail fence with welded wire is ideal for dogs. It retains the timeless beauty of split rail fence while keeping your furry friends safely enclosed. Unlike electronic fence, split rail does not fail due to power outages, battery issues or broken lines, and it does not shock your best friend.
What is the cheapest fence to build?
Though yard fencing can be expensive, we’ve rounded up some cheap fence ideas to fit nearly any budget. Concrete fencing. Barbed wire. Recycle leftovers. Living fences. Lattice fencing. Hog wire. Wattle fencing. Chicken wire. A chicken wire garden fence is likely the best-known affordable fencing.
How tall is a 3 rail split rail fence?
The two standard fence styles are two-rail, which stand about three feet tall, and three-rail, which stand about four feet tall. rails are commonly available in eight- and ten-feet lengths.
Should split rail fence posts be set in concrete?
No, the hole should be filled only with the dirt that came out of the hole and tamped back in . Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.
How long will pressure treated split rail fence last?
Pressure Treated Rails Pressure treated wood will usually last about 9 and 25 years, so it comes in just under the natural cedar. This type of treated wood is also filled with chemicals – those can leach out into the surrounding ground, which is why it should never be used near potable water sources or food gardens.
How long should a split rail fence last?
Built-in Natural Pest Defense Rails above ground can last even longer than that. So, you can count on your cedar split rail fence lasting at least 15 years, if not longer. Some species can last up to 30 years. Few other materials on the market can measure up to that.
How do you make a split rail fence from scratch?
Steps to Building a DIY Split Rail Fence Mark and measure your yard to ensure that your fence materials fit. Dig your post holes with your post hole auger. Fill six inches of the holes with gravel. Starting with the end posts, insert posts into the holes. Insert your rails into the holes of the posts, and voila!.
How deep is a split rail fence post?
Dig Post Holes The best practice is to put 1/3 of the post in the ground. Using a post hole digger or power auger, dig the holes 10 inches to 12 inches wide and 6 inches deeper than needed.
How deep should a split rail fence post be?
Setting Posts Dig hole 24″ to 30″ deep. Exact depth will be dependent on how high you want the first rail above the ground. 2. Place post in the hole, add 12” of dirt, compact and repeat.
What type of fence lasts the longest?
What Type of Fence Lasts the Longest? Chain-link fences with a galvanized finish that doesn’t rust are the longest lasting fences. All other components of the fence are made of steel and are also galvanized, so there is relatively no maintenance.
Who gets the nice side of the fence?
The finished side should face toward your neighbor. Not only is this more polite, but it’s the standard. Your property will look a lot nicer with the “good” side facing the outside world. Otherwise, your fence will look like it was installed backward.
What is the easiest fence to install?
The quickest and easiest fence to install is with wood panels. The wood panels are not always the cheapest, but they save time rather than installing the rails and pickets separately.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Should you stain a split rail fence?
Cedar split rail fences can last a very long time and increase curb appeal when well cared for! Cleaning and sealing your split rail fence with stain will give it a fresh look and a few more years of protection!.
Will concrete rot fence posts?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. We have three ways to solve the rotten post problem. Concrete should be poured around the post – no concrete under the post.
How far apart should posts be for a 11 split rail fence?
However, remember to ask the fence supply company how long each of the rails are. Some of the commonly available options are 9 feet long and 11 feet long rails. Knowing this measurement would help you to space the posts accordingly. 9ft rails have post every 8ft and 11ft rails have post every 10ft.
How do you maintain a split rail fence?
Our 7 tips for maintaining your split rail fence include: Use pressure-treated wood. Stain the wood regularly. Keep plants and grass away. Use Fence Armor. Choose vinyl for low maintenance. Do repairs immediately. Regular inspections reduce common problems.
How do you angle a split rail fence?
How to Create Angles in a Split Rail Fence Lay out the fence line using stakes and mason’s string. Set an uncut post into its hole at each corner that will form an angle (other than 90 degrees). Secure the post to a work surface. Cut out the wood between the drilled holes, using a reciprocating saw.
