Table of Contents
A standard American roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually takes this down to about 27 usable square feet per roll. Enter the total of all wall widths, in feet, in the room. Enter the height, in feet, of the room.
How do I calculate how many rolls of wallpaper I need?
How to Calculate Wallpaper Quantities Measure the Wall. First, you will need to measure each wall that you want to paper. Get Dividing. You can now divide your wall widths by your wallpaper width to work out how many drops you need. Multiply. Pattern Repeat. Add Your Totals Together.
How many rolls of wallpaper can cover a room?
Divide the total square feet of wall space by 27 to determine the number of rolls required. The formula is: Square footage ÷ by 27 = Number of rolls. At this point, you could subtract 21 square feet for any doors and 15 square feet for each window.
How many m2 are in a roll of wallpaper?
Standard wallpaper rolls made n Europe have dimensions of 10.05 m x 0.53 m, which amounts to 5 m2 (square meters).
How many rolls of wallpaper do I need for one wall?
For example, if your total surface area is 480 square feet (45 m2) and each roll gives you 25 square feet (2.3 m2) of usable wallpaper, then 480/25 = 19.2. Round the answer up to the nearest number. So, you would need 20 rolls total to cover your wall.
How do I calculate sq footage?
Basic formula for square feet Multiply the length by the width and you’ll have the square feet. Here’s a basic formula you can follow: Length (in feet) x width (in feet) = area in sq. ft.
How much wallpaper does 2 rolls cover?
Depending on the wallpaper sheet width, a double roll covers 57 to 61 square feet, while a single roll is 29 to 31 square feet. Remember, wallpaper only comes in double rolls, even though they price out the cost in single roll quantities. You can count on double rolls to always be twice as long as single rolls.
How much does it cost to wallpaper a bedroom?
Cost to Wallpaper a Room Room Cost range Approximate wall area in sq. feet Bedroom $1,600 – $4,000 400 Bathroom $1,040 – $2,600 260 Living Room $2,400 – $6,000 600 Dining Room $2,400 – $6,000 600.
How many pieces of wallpaper are in a roll?
There is normally 3 drops to a roll, any excess paper will do above doors and windows if needed.
How many strips of wallpaper are in a roll?
Wallpaper rolls typically measure 33′ (10m) long and 21″ (535mm) wide. If the room you’re decorating has a ceiling height of 9′ (2760mm) you’ll get three drops of wallpaper per roll. Allow a few inches per cut length for trimming the top and bottom off each strip. Allow more if the wallpaper has a large pattern repeat.
How do I calculate how much wallpaper I need UK?
Measure the width of your wall(s) including any doors, windows and recesses. Then divide that by the width of the wallpaper roll you intend to buy (provided in product specification). This number will tell you how many drops of wallpaper you need for your room.
How big is a roll of wallpaper?
In the U.S.A., a single roll of wallpaper is typically defined as a wallpaper roll with the dimensions 21 inches wide and 16.5 feet in length (21″ x 16.5′). A double roll usually has the dimensions of 21 inches wide and 33 feet in length (21″ x 33′).
How many rolls of wallpaper do I need for a small bathroom?
Material Needed I calculated the square footage of the bathroom which was 300 square feet of walls and each roll of the paper I found is 56 square feet so I needed at least 6 rolls. (Disclosure: This post contains affiliate links where I make a small commission.)May 24, 2018.
How do you measure a roll of wallpaper?
Take the height measurement of the room/area in metres and multiply it by the number of widths needed. Divide that number by the length of the wallpaper roll – usually 10m – and you’ll have the number of rolls needed.
How do you figure out square footage for wallpaper?
Measure the width of each wall where you would like to apply the wallpaper and add them all together (“Combined Width”). Measure the height of the walls. Multiply the Combined Width by the height of the walls – this is the total square footage (“TSF”) of wall space you need to cover with wallpaper.
How many square feet is a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
How many sq ft is 4×8?
A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.
How much wallpaper do I need?
A standard American roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually takes this down to about 27 usable square feet per roll. Enter the total of all wall widths, in feet, in the room.
How much should I pay for wallpaper hanging?
The actual labor costs of hanging wallpaper can range from $1 to $7 per square foot or $3 to $9 per yard. It’s approximately $25 to $80 per hour to have a professional put up wallpaper. This estimate can increase if the contractor or wallpaper pro needs to perform any repairs to your walls during the process.
