QA

Quick Answer: How Much Does A Pool Motor Cost

Pool Motor Cost A new pool motor costs $300 on average, with most models ranging from $100 to $500 (materials only). If your pool pump stops working, you might only need to replace the motor instead of the entire system.

How much does it cost to replace a pool motor?

On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.

How long do pool Motors last?

Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.

How do you know if your pool pump motor is bad?

Your pump could be leaking water, or the bearings might need to be replaced instead of the entire motor. Screeching is also a sign that your motor bearings need to be replaced. These loud, often painful sounds could also be a sign of rust or oxidation, making it more difficult for the bearings to do their job.

How much is pool pump and motor cost?

The national average cost for installing a pool pump is between $700 and $1,300, with most people paying around $1,000 to install a variable speed pool pump in an in-ground pool.Pool Water Pump Price by Type. Type of Pump Costs (Materials Only) Dual-Speed $200 – $800 Medium-Head $300 – $800 Variable-Speed $500 – $1,200.

Is it worth fixing a pool pump?

When determining the magic number of replacement parts cost versus the cost of the whole pump, we generally suggest 60-75% as the standard. If the cost to repair is within or over this range, it is smarter to replace the pump. This way you have a brand new pump and warranty covering any mishaps down the line.

Why did my pool pump stop working?

It could be something blocking it, a dirty pool filter, or too much air in the system. Make sure your swimming pool water level isn’t too low and check your skimmer basket for debris. You may need to fill your strainer basket with water and reseal it. Learn more about how to fix air in your pool pump.

Do pool pumps lose power over time?

Over time, older pumps can begin to deteriorate and lose power. In other cases, you might need to clean the filter or have it backwashed.

Why is my pool motor so loud?

One of the most common causes for a noisy pump is that it’s running dry. If your pool water level has fallen below halfway on the skimmer faceplate, your pump might be sucking in air as well as water. This puts more strain on the pool pump, causing it to work harder—and louder.

Can a pool pump be repaired?

Most of the new generation of pumps are already equipped with automatic controls and safety features. In fact, if you take enough time to learn the manual, you might find yourself able to repair some of the problems on your own. Of course, there are repairs and replacements are best left in the hands of professionals.

When should I replace my pool pump motor?

Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800. Your pool pump is the “heart” of your swimming pool as it circulates water throughout, bringing water through the filtration and heating systems.

How much does it cost to run a 1 HP pool pump?

Our 1 hp (standard) example UST1102 motor above will cost between $1-$5 per day, depending on what your power company charges per kWh, and on how many hours per day the pump is running, which changes within the season. This will result in a monthly cost of $30-$150.

How much does it cost to install a pool pump motor?

Swimming Pool Water Pump Costs Item Cost Pump $900-$1,500 Labor Cost $250 Total Cost $1,150-$1,750.

What is the difference between a pool pump and a pool motor?

The pump’s shaft spins up to 3,450 revolutions per minute to turn the impeller to draw water from your pool and then push it through your filter and back to the pool. The motor is a cylindrical steel enclosure, usually black but sometimes gold or almond-colored, bolted to the back end of the wet end.

How much does it cost to rebuild a pool pump motor?

A replacement motor is generally going to cost you in the neighborhood of $150 – $300 depending on the horsepower. Add another $15 – $30 for the absolutely necessary, non-negotiable new shaft seal.

Can a seized pool pump be fixed?

This situation can be completely rectified and the pump will run again. The second cause is that the motor bearings have seized up and do not allow the pump motor to turn. This can only be repaired when the bearings are simply clogged with rust, dirt or debris.

How often should a pool pump be serviced?

We recommend seeking a yearly checkup by a professional, just to make sure everything is in order, and running as it should be. The best time to do this is in spring, right before peak use, so you can guarantee friends and family a safe swim.

Does a pool pump motor get hot?

All electric motors run hot and pool pumps are no different. Under normal operating conditions, the motor end of the pump is hot enough that you can barely touch it — but not searing hot. If you check your pool pump motor and find it is far too hot to be able to touch with your hand, that’s not good.

How long does a pool pump capacitor last?

Standard pool pump capacitors are only good for around 5000 starts before they go bad. That may seem like a lot of starts, but the get used up quite quickly. If you’ve had your pool for a while, it could be possible the capacitor is bad.