Table of Contents
According to Fixr, the average French drain costs $4,500. An exterior drain located fairly close to the surface could cost as little as $1,000, or $25 per linear foot on average. Drains installed under your basement floor could cost $2,000 or more. Expect to pay $60 to $70 per linear foot for installation.
Do landscapers put in French drains?
The landscaping construction company who installs your French drain needs to make sure the proper slope is determined so water flows continuously and consistently to the pop-up valve or exit. Another common failure is the pipe perforations become clogged with dirt and debris.
Are French drains worth it?
French drain systems are incredibly effective because, unlike typical surface drains, they collect water over the entire length of the drain as opposed to one dedicated area. The force of gravity helps to guide water along a reliably smooth path to a desired discharge point.
How long does it take to install a French drain?
Completed Installation Time 6 – 8 Hours | A simple french drain installation can be done in one day by a team of professional landscapers barring any complications. 1 – 2 Days | If you rent a trencher and do the project yourself, you can expect it to take up most of your weekend.
Does French drain need an outlet?
A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either.
Why do french drains fail?
Over time, a French drain may become clogged. Tiny soil and clay granules slip through the pores of the landscape fabric and gradually build up inside the pipe. Another common cause of French drain clogs is root intrusion from grass, shrubs, and trees.
How far should French drain be from foundation?
Recommended French Drain Installation Distance We recommend installing the french drains between 2 and 5 feet away from the foundation. There are a few variables that impact the exact distance to dig the new drain lines to carry water away from your home.
What is the difference between a French drain and a trench drain?
Aside from what we’ve listed here, the difference between a French drain and a trench drain is that a French drain is used for water that is underground while a trench drain diverts excess water from a surface.
How long will a French drain last?
Properly installed drains use advanced plastic sheeting called geotextile to protect the drainpipe from a blockage. French drains can last decades before needing maintenance. If your home requires a sump pump, a high-quality model will last around ten years before needing replacement.
Does a French drain need a slope?
French drains need to have a slope of at least 1 percent, so the force of gravity will work for you. This means that the drain should slope down a total of at least one inch for every 10 feet of pipe.
How much gravel do I need for a 50 foot French drain?
How much gravel do I need per foot of French drain? You would need around 0.72 cubic feet of gravel per foot length of French drain for a typical French drain width of 10 inches and a depth of 12 inches if you’re using a 4″ drain pipe.
Where do French drains go?
These drains are used to direct surface water or groundwater away from a specific area, such as a home’s foundation. French drains direct surface level water toward the lowest point and allow it to seep through the surface level gravel into the drain.
How do I get rid of standing water in my yard?
How to get rid of standing water Water wisely. This solution is for you if you notice puddles in your lawn or driveway even when it hasn’t rained recently. Dethatch and aerate. Add compost. Build a rain garden. Add a drainage system. Take care of gutters and downspouts.
Where should a French drain drain to?
LOCATION: French drains should run along the center of the low area(s) needing drained, and end at the desired drainage point. There should be adequate “fall” in the french drain construction, for water to naturally run downhill, toward the drainage end.
How shallow can a French drain be?
DIGGING A TRENCH FOR A FRENCH DRAIN Because there is a direct relationship between the diameter of a drain pipe and its relative effectiveness, make your trench no smaller than 12 inches wide, and aim for a depth between 18 and 24 inches.
Can a French drain get clogged?
But, just like any other type of drain, French drains are susceptible to clogging. Soil and debris have a tendency to build up inside the pipes, eventually stopping water from flowing altogether. To avoid letting water back up into your home, follow this French drain cleaning guide.
What is the difference between a curtain drain and a French drain?
A curtain drain is an underground trench that slopes downward. It usually begins around two feet below ground level and is one and a half feet wide. A French drain sits at ground-level. You can see the gravel even with the ground around it.
What size gravel is best for French drain?
In general, you want to aim for ½ inch to 1-inch gravel for drainage. Areas that will see especially heavy flow may need larger gravel. Or, projects without drainage pipes may also need larger gravel. For example, a French drain without perforated pipe needs 1 ½ inch gravel.
