Table of Contents
Paid about $35 per 4×8 sheet, well worth the extra cost. This is the first time using hardie panels, they are well worth the extra money. When you know it.
How much is a sheet of Hardie board?
Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.
Does hardiplank come in 4×8 sheets?
HardiePanel vertical siding is 5/16 in. thick and is available in 4×8, 4×9 and 4×10 sizes.
What is cheaper than Hardie?
Across the US, LP Smart siding costs 25-35% less than James Hardie. This difference amounts to thousands of dollars! LP is cheaper because both the materials and labor cost less than Hardie siding. On average, Hardie siding costs $7-9.5 per sq.
Is there an alternative to Hardie board?
Steel Board-and-Batten Siding: A Better Alternative to Hardie Board. Board-and-batten siding has a classic appearance that complements a wide range of architectural styles. It can give any home a more rustic-looking exterior, while increasing curb appeal.
How much does a 4×8 sheet of hardie board weigh?
Hardieplank weighs 2.3 lbs per square foot.
Do you need plywood under Hardie board siding?
Fiber cement siding should be installed over plywood, OSB, or sheathing. Building codes will usually require installing siding over water-resistant barriers and nailed into the studs every 16 or 24 inches.
Is James Hardie siding worth it?
James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.
Do you paint Hardie board siding?
Painting Hardie board siding will significantly improve its look and its longevity. Siding finishes generally last for around 15 years, so you need to do it, and do it right. Painting, when done properly can really bring out the wood feel of the Hardie board.
What is the difference between hardiplank and Hardie board?
Fiber cement siding is often called “hardiplank” or even “hardie board” named from the most popular brand of fiber cement siding which is manufactured by James Hardie. Fiber cement planks are formed by combining wood pulp with Portland cement.
Which is more expensive Hardie board or vinyl siding?
Vinyl siding is nearly always less expensive than fiber-cement siding both in terms of the product and labor costs since it can be installed faster. Still, any cost savings may not be reflected in the eventual sale of your home: For resale value, HardiePlank is the better choice.
What is better than hardiplank?
The primary difference between SmartSide and Hardie siding warranties is that SmartSide offers a 50-year, prorated limited warranty, while Hardie offers a 30-year, non-prorated warranty. You’ll want to not look at just the length of the warranty, but also at what it does and does not cover.
What is the difference between board and batten and Hardie board?
Is board and batten the same as Hardie Board? No, they’re not the same. Board and batten is the style of siding while Hardie Board is the material manufactured by James Hardie. Hardie Board is a type of fiber cement siding, and it can be used for board and batten.
Which is better smart board or Hardie board?
Once the contractors believed in the product, the information was passed to the homeowners, including the following advantages: LP SmartSide has superior moisture protection and strength, longer lengths than Hardie (16′ over 12′), less weight than Hardie, and is less expensive to install (no special cutting tools Jun 17, 2014.
How expensive is board and batten?
Board and Batten Siding Costs Material boards cost between $0.75 and $10 per square foot. Including labor, the total cost to install board and batten siding averages $2.25 to $12.50 per square foot.
Can you put Hardie board over old siding?
According to the best practices manual from James Hardie, existing siding can be used as a substrate as long as it is in good condition, meaning that it is not warped, bowed, curling, delaminated, or rotting. If none of these potential problems are present, the existing siding is probably fine to use as the substrate.
Is Hardie panel waterproof?
No water penetration through Hardie® Backer Board with HydroDefense™ Technology during 48-hour hydrostatic test. HardieBacker® Cement Board with HydroDefense™ Technology is a long-lasting, waterproof solution for walls, floors, and countertops. WEIGHT: 2.6 lb/sq.
Can you screw into Hardie board siding?
HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel. Fasteners shall be installed between 1 in. and 3/4 in.
Do you nail or screw Hardie board?
What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs.
What do you fasten Hardie board with?
Fasten the siding – You can fasten it with a pneumatic nailer or nailing by hand. You can use corrosion-resistant screws, or you can use stainless steel or hot-dipped galvanized nails. You can nail the siding by either blind nailing it at the top or face nailing it at the bottom.
What kind of nails do you use for Hardie board siding?
NAIL TYPE: Fasteners must be corrosion resistant, galvanized or stainless steel. Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.
