Table of Contents
How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.
How much does it cost to pour a 10×12 concrete slab?
Cost of concrete per square foot Slab Size Square Feet Average Cost 10×10 100 $600 10×12 120 $720 10×20 200 $1,200 12×12 144 $864.
How much does it cost to pour a 20×20 concrete slab?
But how much does a 20×20 concrete slab cost? You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary.
How much does it cost to pour a 12×12 patio?
COMPARE COSTS FOR SMALL, MEDIUM AND LARGE PATIOS Patio Dimensions (feet) Average Cost SMALL 12×12 $1,730 MEDIUM 10×20 $2,150 LARGE 20×20 $3,650.
How much will my concrete slab cost?
Cost of a Concrete Slab Expect to pay a base cost of around $6 per square foot for the material itself, or within a range of $4 to $8 per square foot depending on factors like labor and concrete thickness.
How many yards of concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
How much does it cost to build a 10×10 concrete slab?
To pour a typical 10×10 concrete slab will cost $670 to $930, a 12×12 slab for a patio will cost $796 to $1,476, a 20×24 driveway slab runs between $1,440 and $3,360, and a 24×24 slab for a garage will cost $3,058 to $5,944. Get free estimates from concrete companies near you.
How many bags of concrete do I need for a 10×10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
How many bags of cement do I need for 12×12?
To determine how many bags of concrete you will need, divide the total cubic yards needed by the yields, at 4 inch thick, for a 12×12 slab you will need 1.76 yards of concrete, so number of 80lb bag of concrete = 1.76 ÷ 0.022 = 80 bags, No. of 60lb bag = 1.76 ÷ 0.017 = 104 bags & No.
Which is cheaper a concrete patio or pavers?
Concrete is less expensive than pavers, both in terms of materials and the price of labor. The same goes for the cost of installing patios and walkways. Concrete costs between $6 and $12 per square foot, installed. On the other hand, pavers typically cost $8 to $25 per square foot, including installation.
What is cheaper wood deck or concrete patio?
A concrete patio is cheaper than a wood deck because concrete is more affordable in bulk. A concrete patio’s average cost ranges between $3-5 USD per square foot for the materials and labor combined, while a wood deck’s price is much higher, ranging between $3.75-5 for just the materials alone.
How many sq ft does a yard of concrete cover?
How much concrete is in a yard? Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.
Do you need rebar for 4 inch slab?
The thickness of rebar should be no more than 1/8 that of the slab, so a 4” slab shouldn’t have steel greater than #4 or 1/2″ bar. It’s best to check with a Structural Engineer if your slab will bridge or cantilever. What is this? For 4” concrete slabs used for driveways and patios, #3 rebar is common.
How much concrete do I need for a 30×30 slab?
18 yards of 3000 psi concrete mix @ 135.00 per yard. Wire mesh reinforcement. A double row of #4 rebar around the edges. Labor to form the slab.
How much is a 10×20 concrete patio?
How Much Does a 10×20 Concrete Patio Cost? A concrete patio costs between $4 and $12 per square foot, including materials and labor. Based on those estimates, a 10-foot by 20-foot concrete patio would cost between $800 and $2,400.
How many 80lb bags of concrete make a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
How many bags of concrete do I need for a 10×12 slab?
Regarding this, “how many bags of concrete do I need for a 10×12 slab?”, at 4 inches thick, generally you will need approximately either 86 bags of 60lb or 67 bags of 80lb of premixed concrete for a 10×12 slab, at 5 inches thick slab, either 109 bags of 60lb or 84 bags of 80lb premixed concrete are required, while at 6.
How thick should a concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
Can you pour concrete directly on dirt?
Long story short, yes you can pour concrete over dirt.
Is it cheaper to pour your own concrete?
Is It Cheaper to Pour Concrete Yourself? Whether you’re pouring concrete countertops or a patio out back, it may be cheaper to pour concrete yourself rather than hiring someone. The materials needed to pour concrete yourself cost about $1.76 per square foot, based on data from Porch.com.
Do you need gravel under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
