Table of Contents
A cheap 12 ft polythene Jon boat can be bought for as little as $550 while an 12 ft aluminum Jon boat can cost as much as $3000. High-end 21 ft Jon boats can cost as much as $30,000.
How much horsepower does a 12 foot aluminum boat need?
Length in feet times transom width in feet then check the table and using some common dimensions for 12′ semi v hulls the answer is about 15 hp. Your mileage may vary, and this is a conservative formula.
Are aluminum boats cheaper?
Common production aluminum boats tend to be less expensive, sometimes significantly less expensive, than their fiberglass counterparts. Their lower weight means that aluminum boats are easier to launch and load at the boat ramp, easier to push on or off sandbars, and easier to trailer around with a small tow vehicle.
What is the life expectancy of an aluminum boat?
Boats made of aluminium clearly has the longest life span of the two. A very high material strength, good corrosion resistance, and other advantages of aluminum makes it possible for an aluminum boat to easily live 30-40 years. This longevity also results in a low impairment and a high resale value.
How much is a brand new Jon boat?
From a few hundred to thousands of dollars for a new Jon Boat, the average price is $5,400.
What size motor do I need for a 12 foot boat?
10 foot – 3 – 10 hp motor. 12 foot – 10 – 15 hp motor. 14 foot -15 hp motor. 16 foot – 15 – 20 hp motor.
What is the biggest motor you can put on a 12 foot jon boat?
12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP, however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more.
Why are aluminum boats so expensive?
Originally Answered: Why are aluminium boats more expensive? Because Aluminum is more expensive than other materials used for boat building like steel,fiberglass and wood etc. Also working on Aluminum is more expensive.
Do aluminum boats hold their value?
It holds its value: Because aluminum boats have a long life, they do a good job at holding their value. This means your boat’s resale value is likely to be close to what you initially paid for it.
Are aluminum boats stronger than fiberglass?
Modern boats are most often constructed of fiberglass, but aluminum is the best material to choose for a workboat. Aluminum is more durable than fiberglass, which is prone to breaking or cracking from impact. Aluminum is more resistant to punctures also.
Do aluminum boats wear out?
Typically, an aluminum boat can last 30-40 years with regular and little maintenance. Aluminum doesn’t rust or deteriorate over time, and while it can corrode, it will last a lifetime if it is adequately maintained.
Why do bass boats go so fast?
The reason they are so fast is because they will have to race to get to spots in competition. It’s also nice to be able to rip across big lakes fast and cover water quick. They also tend to be pretty large boats most that go that speed are 21′ long and have a really wide beam.
How long do saltwater boats last?
A well-maintained aluminum boat can easily last up to 30 years or more if it is well maintained. The common problem with aluminum boats comes with saltwater, causing corrosion.Boats Life Span: How Long Do Boats Last? Precisely Answered Including All Boat Types. Boat Type Average Life Span Aluminum Boat 15 – 30 years.
Is a 12 foot jon boat big enough?
As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs. At 20+ feet in length a jon boat is able to hold up to 1,900 lbs of people and equipment.
Why is it called a jon boat?
It is told that fishermen in Scandinavia loved using flat bottomed boats to carry themselves and their fishing gear to the larger boats. Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. And a few of the fishermen were named “Jon” or “John”.
What are the benefits of a jon boat?
When it comes to shallow water fishing, Jon boats can’t be beaten. The flat hull is great because it allows you to cruise over shallow water, mud, or reeds to get to the most desirable fishing spots. This is especially helpful when fishing for bass or other fish that like to hide away from the open water.
How much does a 14 ft jon boat cost?
13 ft – 14 ft Jon boats will typically cost between $1500 and $2,250. 15+ ft Jon boats can cost from $2,500 to $3,250.
How fast will a 9.9 hp outboard go?
Assuming this is a light 14′ utility boat and a standard 9.9, Mercury would recommend a 8.5 to 9.5 pitch prop for the OP’s application and predicts a top speed around 20 mph.
Where can I buy a boat capacity plate?
Look for a capacity plate near the operator’s position or on the transom of the boat.
Do you have to register a jon boat with a trolling motor in Florida?
Florida boating laws: Yes, all vessels used on public waterways with any kind of motor must be titled and registered.
How fast will a 3hp outboard go?
To give you a simple reference, a 3 hp electric outboard can push a 12 ft boat with 150 kg (331 lbs) load at a max speed of 9 km/h (5.6 mph). That’s to say the 3 hp outboard motor can provide more than sufficient propulsion for a 10 ft tender or work as an auxiliary power for a daysailer of up to 1.5 tonnes (3307 lbs).
How much horsepower do you need for a boat?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
Can you use a aluminum boat in saltwater?
Aluminum Can Do Well in Salt and Freshwater When not in contact with other metals, aluminum can do quite well in both fresh and saltwater, needing only bottom paint for aluminum boats to prevent fouling. As you can see, building an aluminum boat for salt water takes thought.
What is a good size boat for the ocean?
You can fish offshore in a boat as small as 10 feet, although it’s best to have a boat at least 15 feet long for safety and efficiency when fishing offshore. Boats up to 30 or 40 feet may be appropriate for some kinds of offshore fishing.
Is fiberglass cheaper than aluminum?
The material is also usually more expensive than aluminum. So, if you’re on a budget, then fiberglass might not be the best option. Fiberglass also requires a lot of maintenance if you want to keep it in good condition. Since it’s not a metal, the material also has less structural strength than aluminum.
