Table of Contents
A 4 x 8-foot sheet of standard 5/8-inch thick drywall weighs 74 pounds, and a 23 percent reduction in weight offered by ultralight can be significant.
How much does 12 foot 5 8 sheetrock weigh?
Standard Drywall One-half-inch board weighs 54.4, 68 or 81.6 pounds for sheets of eight, 10 or 12 feet. Boards 5/8 inch thick weigh 73.6, 92 or 110.4 pounds per eight, 10 or 12 feet.
How much does a 5/8 inch drywall weigh?
A 5/8″ sheet of drywall, which is used to achieve fire ratings, typically weighs a little over 70 pounds. Also, depending on their dimensions, special types of drywall including moisture resistant products are often even heavier. Four by twelve feet panels can weigh as much as 125 pounds!.
How much does a 4×8 sheet of 5/8 sheetrock weigh?
A 4 x 8-foot sheet of standard 5/8-inch thick drywall weighs 74 pounds, and a 23 percent reduction in weight offered by ultralight can be significant.
What is the weight of 5/8 plywood?
In it, they state that softwood plywood should weigh approximately 3 pounds per square foot, per inch of thickness. Actual plywood sheets weigh slightly less, as the specification is for pre-sanded sheets.Softwood plywood weight chart. Thickness Actual Weight 5/8” 48 lbs 3/4” 60.8 lbs 1-1/8” 84.5 lbs.
How much does a 4×10 sheet of 5/8 drywall weight?
Using lbs/ft2 calculations for 48” wide sheets Lbs/ft 2 14 ft long 1/2” Standard 1.6 89.6 5/8” Standard 2.2 123.2 1/2” Lightweight 1.25 40 5/8” Lightweight 1.65 52.8.
What’s the difference in sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How much does a 4/8 sheet of drywall weigh?
The weight of drywall is 2.31 pounds per square foot. Total weights in lbs can be different by size and brand. 4′ by 8′ by 12 is close to 52 pounds while 4′ by 12′ by 12 is close to 77 pounds.
What is the difference between standard and lightweight drywall?
Lightweight: Lightweight drywall is generally used the same way as standard drywall, but it’s easier to carry and hang because it’s 25% lighter. Fire-Resistant: This type of drywall normally contains chopped fiberglass in its core for extra fire resistance.
Is lightweight drywall as good as regular drywall?
Although both standard drywall and lightweight drywall are good for any room in your house (except the bathroom) the lightweight option is more user-friendly. The advantage of using lightweight over standard drywall is that you will be more productive when carrying a product that is, on average, 13 pounds lighter.
Can you use 1/2 inch drywall ceiling?
1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
What is the thickness of 5/8 plywood?
Typically, the actual thickness of plywood is 1/32 inch less than the nominal thickness.Thickness in millimeters. Thickness (inch) Thickness (milimeter) 5/8” 15.9mm 3/4” 19mm 1-1/8” 28.6mm 1-1/4” 31.75mm.
Do they make 5/8 plywood?
x 4 ft. x 8 ft. BCX Pressure-Treated Plywood.
How much do 2x4x8 weigh?
A kiln-dried 2x4x8 weighs around 11 pounds or about 1.3 pounds per square foot. Kiln-dried wood is ideal for building furniture as it is more stable than green lumber, while it is more likely to warp and twist as it slowly dries.
What is the fire rating on 5/8 drywall?
The 5/8-inch, “fire-code” drywall (called Type X) increases a wall’s fire rating to a minimum of 1 hour, from the 30-minute rating for standard ½-inch drywall. And it’s not just thickness that makes the difference. Type X has a denser core and contains glass fibers that keep it from crumbling in the heat.
How many screws go into a sheet of drywall?
How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
How many sheets of drywall can a truck hold?
A truck can hold between 28 and 67 sheets of drywall. Many factors affect how many sheets of drywall you can carry, such as the size of your truck and the thickness and length of your drywall.
Which is cheaper drywall or sheetrock?
As with most name brand materials, sheetrock tends to be a bit more expensive than its non-name brand counterparts. However, many builders believe sheetrock provides a better quality product and is a bit easier to work with than generic brand drywall.
What is purple drywall?
Our most versatile drywall product, PURPLE XP® Drywall is moisture-, mold- and mildew-resistant and ideal for almost every room in the home. Performance. Fire Resistant, Improve Air Quality, Mold & Mildew Resistant, Moisture Resistant. Project Area.
What is the average cost to hang and finish drywall?
Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and level of finish. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12×12 room is $580 to $1,800.
What is blue board drywall?
Blue board drywall is also known as plaster baseboard. Blue board is used for veneer plastering, and the surface paper has special absorption qualities. It has a high water and mold resistance and there are fewer steps involved in veneer plastering. Blue board drywall is not made for mud, tape, or paint.
What kind of drywall do you use in a garage?
For the majority of your garage, you can use standard 1/2 inch drywall. For the ceiling and wall abutting the house (if this is an attached garage), you should use 5/8-inch sheetrock or type X fire-rated drywall.
