Table of Contents
How Much Concrete per Vinyl Fence Post? Post Size Post Height (above surface) 50lb Bags Required 4×4 3-4ft double-triple rail9 inch hole 1.5 5×5 3-4ft double-triple rail12 inch hole 2 5×5 5-6ft semi & privacy12 3.
Do you put concrete inside vinyl fence post?
Manufacturers unanimously require vinyl fence posts to be installed into a concrete filled post hole. Setting vinyl posts into concrete provides a consistent footing to ensure the posts will remain inline and true for years to come. Concrete should fill the post hole up to 3-4 inches from the top.
How many bags of concrete do I need for a 4×4 fence post?
It’s right for a 4×4 fence post to have 1 bag per hole. The depth of the post hole should be half of the post height. For a 6′ above ground post, place 3 feet in the ground and use a post with an overall height of 9 feet.
How deep should vinyl fence posts be?
How Deep Should a Fence Post be for Vinyl? Rule of thumb, 30 inches works best with most PVC fence posts. Anything less than that is based on other factors like manufacturer design and installation specs. Post holes should be deep enough to hold 1/3 the length of your post, plus 6 more inches for a gravel base.
What is inside a vinyl fence post?
Typically, the only vinyl fencing product that requires wood inserts into every vinyl post, are preassembled products purchased at local major retailers. These products use a vinyl post sleeve, a thinner walled material, to surround the wood post insert.
How many bags of quikrete do I need for a fence post?
When you’re installing a fence post, the amount of concrete you need will be calculated based on the diameter of your fence post and how high the post is above ground. Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How big of a hole do I need for a 4×4 post?
A general rule of thumb is to dig the diameter of the hole at least 3-4 times the diameter of the post. For example, if setting 4 x 4 wood posts, dig holes 9-12″ in diameter. Posts should be centered in the hole and the posts should always have concrete under them.
Should a vinyl fence touch the ground?
Never install the vinyl fence too close to the ground The fence can topple under the pressure. Panels close to the ground may divert rainwater and cause flooding on the property. Always leave space below the vinyl fence panels.
Which is better PVC or vinyl fence?
PVC has many benefits including a high strength-to-weight ratio, low production costs, and a long lifespan. However, calling a vinyl fence a “PVC fence” isn’t accurate, because vinyl fences contain much more than just PVC.
How can I make my vinyl fence stronger?
To prevent this from happening, the vinyl post needs to be strengthened and reinforced. Strength can be added to a vinyl post by tightening up the post, rails, and pickets around the entire perimeter of the fence.
Are plastic fence posts any good?
Benefits Of recycled Plastic Fencing. Strong and durable It will never rot or require treatment for the weather saving you time and money over the longer term. Environmentally friendly these posts are 100% Recyclable. If in 30 years time, you’re bored of your fence, it can be recycled!.
Can you reuse vinyl fence posts?
The fence slats and rails connect with screw-and-bolt fasteners to the posts. Unlike standard posts, you should not rock vinyl posts back and forth, as this could damage them.
How do you reinforce a fence post?
Mix up some concrete and water in a wheelbarrow and have it ready to go, it should be the consistency of oatmeal. Re-level the fence post and add a support beam to hold it in place. With the post supported, fill the hole with the concrete compound to about an inch below ground level.
How much concrete do I need for a deck post?
45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for one cubic foot, you’ll require 2.2 bags of 60-lb concrete.
How deep should a 12 foot post be in the ground?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
What cement do I use for fence posts?
For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.
What is the minimum depth for a fence post?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
What happens if fence posts aren’t deep enough?
Anything less than 24 inches will put your fence at risk of blowing over in adverse weather conditions. Remember, these are wood posts that have been set in concrete, if your fence post isn’t deep enough, it is prone to snapping and collapsing all of your hard work.
How deep should a 8ft post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
