Table of Contents
Sono Tube Calculator For example, a sono tube with a 10″ diameter and a 4′ depth requires 0.08 cubic yards of concrete.
How much concrete do I need to fill a 12 inch sonotube?
Concrete Requirements Size Chart Diameter (in.) Height of Column 10 .061 .404 12 .087 .582 14 .119 .792 16 .155 1.034.
How many bags of concrete does it take to fill a 10 inch sonotube?
Concrete Mixes SONOTUBE # of bags required per: 25 kg 25 kg 8″ x 4′ tube 3.2 6.5 10″ x 4′ tube 5.1 10.1 12″ x 4′ tube 7.3 14.6.
How much concrete does it take to fill a footing tube?
45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for one cubic foot, you’ll require 2.2 bags of 60-lb concrete.
What size sonotube for a 4×4 post?
The rule-of-thumb is to use a tube diameter 3 times the post width, therefore use a 12” diameter Sonotube for a 4×4” post.
Do I need rebar in sonotube?
To support a beam for a residential deck, does a Sonotube pier need any rebar? A. We usually recommend that a minimum of two pieces of #4 rebar be placed vertically in an 8-inch-diameter concrete pier supporting a structure. A larger-diameter pier should have four or more pieces of vertical rebar.
How many 80lb bags of concrete are in a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
How many bags of cement do I need for 12×12?
of 40lb bag = 1.76 ÷ 0.011 = 160 bags. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yields, at 5 inch thick, for a 12×12 slab you will need 2.22 yards of concrete, so number of 80lb bag of concrete = 2.22 ÷ 0.022 = 100 bags, No.
How many cubic feet is an 80 pound bag of concrete?
30 cubic feet, 60 pounds of concrete mix yields . 45 cubic feet and an 80-pound bag yields . 60 cubic feet. One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about .
How do you calculate pier size?
To determine the load of a deck pier, you must take half the length of the joist span multiplied by half the length of the beam span (measured from pier to pier). This number is then multiplied by 50, which is the 40 psf live load, 10 psf dead load mentioned earlier.
How do you calculate concrete for a round hole?
To find cubic metres needed to fill a round hole EXAMPLE: How much concrete is needed to fill 5 holes 1200mm deep and 1050mm round? ANSWER: One hole takes 1.039 cubic metres, therefore 5 holes = 5 x 1.039 = 5.195. ( say 5.2 cubic metres) NOTE: When the Diameter of a hole is doubled, it takes 4 times more concrete.
How much concrete do I need for a 6×6 post?
How Much Concrete For A 6×6 Fence Post? Depth 50 Lb Bags 18″-21″ 6 22″-25″ 7 26″-28″ 8 28″-30″ 9.
How many bags of concrete do I need for a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How wide should a hole be for a 6×6 post?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
Can Sonotubes be left in the ground?
No, it’s not a problem to leave the Sonotube and its plastic “Square Foot” (like these) in the ground forever. Although they will slightly retard the hydration (loss of water) of the concrete mix, the concrete will achieve enough strength in a few days to build upon.
How deep do concrete piers need to be?
By code, the bottom of a footing must be at least 12 inches deep and below the local frostline—whichever is deeper—and bear on stable, undisturbed soil that is free of organic matter. And the code requires a minimum compressive strength of 2,500 psi for the concrete.
How much does a 90 lb bag of quikrete cover?
A: To cover 67.5 cubic feet it would take (100) 90 lb. bags. Helpful? A: QUIKRETE® Concrete Mix will yield approximately 0.675 cubic feet per 90-pound bag when mixed.
How many yards of concrete do I need for a 24×24 slab?
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
How many 80 pound bags of Sakrete make a yard?
If you’re using 80lb bags of concrete, you’ll need 45 bags to make a yard.
How much concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
How many square feet does a 50 lb bag of quikrete cover?
Regarding this, how much does a 50 lb bag concrete cover?, as 133 lb concrete = 1 CF, so a bag of 50 lb concrete = 50/133 = 0.375 CF, therefore, a 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk.
How many bags of concrete do I need for a 10×12 slab?
Regarding this, “how many bags of concrete do I need for a 10×12 slab?”, at 4 inches thick, generally you will need approximately either 86 bags of 60lb or 67 bags of 80lb of premixed concrete for a 10×12 slab, at 5 inches thick slab, either 109 bags of 60lb or 84 bags of 80lb premixed concrete are required, while at 6.
