Table of Contents
On average, most concrete sidewalk installations cost between $5.89 and $12 per square foot. On average, a concrete sidewalk can cost $8.63 per square foot to install, with a typical range between $5.89 and $12 per square foot.
How much concrete do I need for a sidewalk?
How to calculate concrete: Determine how thick you want the concrete. Measure the length and width that you’d like to cover. Multiply the length by the width to determine square footage. Convert the thickness from inches to feet. Multiply the thickness in feet by the square footage to determine cubic feet.
How many bags of concrete do I need for a walkway?
How Many Bags of Concrete do you Need? Bag Size Pre-mix Bags Needed to Fill 1/4 cu yd 1 cu yd 40 lb bags 23 90 60 lb bags 15 60 80 lb bags 12 45.
How do you figure yards of concrete for a sidewalk?
How do I calculate how much concrete I need for a slab? Measure the area in feet. Multiply length by width, and then by thickness. Divide the resulting number by 27 to find cubic yards.
How deep does a concrete walkway need to be?
A concrete walkway should be 4” thick, at a minimum. If you opt for less than 4”, you’ll experience more cracking sooner. Thicker concrete is always better, more stable, and has fewer cracks. It will also withstand weather and traffic better as 4” of concrete is much stronger than 3”.
How many square feet is a yard of concrete 6 inches thick?
One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.
How many yards of concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
How many bags of concrete do I need for a 10×10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
How many yards are in a 50 pound bag of concrete?
If you’re using 50lb bags of concrete, you’ll need 72 bags to make a yard. If you’re using 60lb bags of concrete, you’ll need 60 bags to make a yard. If you’re using 80lb bags of concrete, you’ll need 45 bags to make a yard.
How many yards of concrete do I need for a 24×24 slab?
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
How many bags of concrete do I need for 100 square feet?
Number of cement bags are required for 100 sqft 6 inch slab = 11.4 bags.
How thick do I need my concrete?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
What is the concrete formula?
Use the formula. Calculating the volume for concrete requires using three dimensions: length times width (which is area) times the height (thickness) or L x W x H. If you are using feet as your standard unit of measurement, this formula will give you the volume of concrete in cubic feet.
How thick should a home sidewalk be?
Sidewalks should be at least 4″ (100mm) in thickness. Simple slabs for small foundations, bases, etc., normally 4″ to 6″ (100mm to150mm) thick, depending on the load they must bear. Slope the walk away from buildings to provide proper drainage.
Do I need to put rebar in a sidewalk?
Do Sidewalks Need Rebar? Most sidewalks don’t need to be reinforced with rebar. Rebar is a steel bar used to reinforce the strength of concrete used to withstand heavy weight. General use sidewalks don’t benefit from the addition of rebar.
How wide should a sidewalk be?
Sidewalks should be wide enough to allow two adults to walk comfortably next to each other. A good standard width is 48 inches. Learn more about walkway widths.
How much does it cost to pour a 24×24 slab of concrete?
A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How many 80lb bags of concrete make a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
How much area will a cubic yard of concrete cover?
Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.
How much area does a 40 lb bag of concrete cover?
Regarding this, how much does a 40 lb bag concrete cover, as 133 lb concrete = 1 CF, so a bag of 40 lb concrete = 40/133 = 0.30 CF, therefore, a 40 lb bag concrete approximately cover around 1.8 square feet area upto depth of 3 inch.
Do you need rebar for 4 inch slab?
The thickness of rebar should be no more than 1/8 that of the slab, so a 4” slab shouldn’t have steel greater than #4 or 1/2″ bar. It’s best to check with a Structural Engineer if your slab will bridge or cantilever. What is this? For 4” concrete slabs used for driveways and patios, #3 rebar is common.
How many yards are in a 60 pound bag of concrete?
It takes sixty 60lb or forty-five 80lb bags of 4000psi concrete mix to make a yard of concrete. Mathematically, 60×60 = 3600lbs and 45×80 = 3600lbs, so a dry cubic yard of concrete mix would weigh 3600lbs.
