Table of Contents
In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.
How much should it cost to replace a ball joint?
The ball joint itself will likely cost you $110 – $230 for the part. Replacement will usually take a qualified mechanic a couple of hours, so you can expect to pay $150 – $300 for labor. When it’s all said and done, you’re looking at somewhere between $225 – $485 on average for the replacement of a single ball joint.
How much does it cost to replace all 4 ball joints?
To replace one or two ball joints, CostHelper readers report paying $260-$1,450, for an average of $522. To replace four ball joints, CostHelper readers report paying $360-$2,000, with an average price of $677.
How much does it cost to replace 2 ball joints?
In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.
Do new ball joints make a difference?
Do ball joints have to be replaced in pairs? No, it’s not necessary, however, often when one ball joint is bad the other could be worn out too. In pickup trucks with double-arm front suspension, the upper and lower ball joints on one side are often replaced at the same time if the labor overlaps.
Can I replace a ball joint myself?
Recognizable for a knocking sound in the wheel well as you execute a turn, fixing old ball joints is an important part of keeping your vehicle road-safe. You can do it yourself for the price of the parts and the right approach.
How long does it take to replace a ball joint?
The ball joint is a small part of your car, and the part itself is only going to cost between $20-$150 or more, depending on where you get it from and what kind of vehicle you own. It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.
What happens when ball joints fail?
Ball joint failure isn’t a common problem, but can be the result of years of driving along bumpy, uneven road surfaces. A broken ball joint may be the cause of a mysterious clunking noise or drifting steering. If a ball joint fails completely, it can even result in the wheel dramatically falling off the car.
How much does it cost to replace ball joints and tie rods?
Tie Rod Replacement Cost – RepairPal Estimate. The average cost for tie rod replacement is between $147 and $208. Labor costs are estimated between $48 and $60 while parts are priced between $99 and $148. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
Can you replace ball joint without replacing control arm?
In order to know if just the ball joint or the whole complete lower control arm needs replaced, the lower ball joint will need to be disconnected from the steering knuckle and checked to see if it fits tight in the lower control arm. If it is loose, then replace control arm.
Which ball joints wear out first?
The lower ball joint usually takes the biggest hits and wears out first. Not only does it need to handle the load of the vehicle, but it also absorbs the shocks of potholes and other bone-jarring road hazards.
Should you replace upper and lower ball joints together?
A: Plenty of mechanics will recommend that you replace both the upper and lower ball joints at the same time. They may also recommend checking related components at the same time, such as the stud hole in the steering knuckle.
How often should ball joints be replaced?
Generally speaking, you should expect to have to have your ball joints replaced between 70,000 to 150,000 miles of driving. Excessive play in the joint can cause additional wear, and if a ball joint fails, your car’s suspension could collapse and you could lose control of the vehicle.
How do you know if your ball joints are bad?
Feeling a vibration in the steering wheel while driving down a level, straight road, or your vehicle drifting to the right or left when going over bumps may also be signs of ball joint wear. Tires — Uneven tire wear may be a sign that your ball joints are wearing out.
Should I replace ball joints when I replace tie rods?
Be advised that it is strongly recommended to replace tie rods and ball joints in pairs, otherwise you may be returning sooner than you think and paying for a wheel alignment all over again when they change the next failed part.
How much does it cost to change control arms?
If just a single control arm needs replacing, it will typically cost between $50 and $100. If the damage is to the whole system, you would need to purchase a control arm kit for around $100 to $250 .
Is it easier to replace ball joint or control arm?
Changing the control arms is much simpler than the ball joints. The joints aren’t too bad a job, except on old cars they tend to get stuck or present other problems. The new arms will literally bolt in and just need an alignment.
Do ball joints leak?
Ball joints used on most modern vehicles have grease sealed inside them (some require that grease be added periodically). The seals can leak with age, and once the grease leaks out, that will accelerate wear and eventually cause failure in an old ball joint.
Can a bad ball joint cause pulling?
Vibrations – when a ball joint wears out, it becomes loose which can create a vibration that you can feel through the floor or the steering wheel while you drive. Steering wheel wandering to the left or the right – worn ball joints cause the steering to pull from left to right on its own.
Can ball joints cause death wobble?
Worn ball joints and unit bearings are also a significant cause of death wobble. Jack up the vehicle and grab the front and back (3 o’clock and 9 o’clock) of the tire and see if there is any play. Oscillations from unbalanced tires can initiate death wobble at freeway speeds.
