Table of Contents
Yardage chart for a standard window PAIR of basic drapery panels @ 2.5x fullness Finished Length Up To Solids & Small Prints Medium Prints (v-repeat up to 12″) 70″ Long 5 yards 5.5 yards 80″ Long 5.5 yards 6 yards 90″ Long 6 yards 6.5 yards 100″ Long 6.75 yards 7 yards.
How do I calculate how much fabric I need for curtains?
A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not. The lighter the weight of the fabric, the more fullness it will require.
How many yards of fabric do I need for an 84 inch curtain?
Covering an 84-inch window will take two widths of the fabric. Taking the length of 90 inches and multiplying it by 2, gives us 180 inches. This is equal to 15 feet, or 5 yards. In this example, curtains for a window 84 inches wide would need 5 yards of fabric.
How many yards of fabric do I need for 96 inch curtains?
A standard single panel width of rod pocket drapes with a length of 96 inches will require about 6-1/4 to 6-1/2 yards of fabric for a pair, but the yardage can increase substantially when large pattern repeats, special headers, and extra fullness are introduced.
How many curtains do I need for a 72 window?
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.
How do I calculate how much curtains I need?
If you’re adding trim to the bottom of the curtains, take the fabric width you calculated per the Homes Furnishing guide and divide that number by 36 to determine the width in yards. Multiply the result by the cost per yard of the trim.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How much wider Do I need to make curtains?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.
How many curtain panels do I need calculator?
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
How much fabric do I need for rod pocket curtains?
Decide what curtain rod you will use to hang the curtain. If it is a thin rod, then you want your fabric to be 8-10 inches longer than the desired length of your final curtain. If it is a thick rod, then you want your fabric to be 10-12 inches longer than the desired length of your final curtain.
How much material do I need calculator?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
What is the length of the 3 foot piece of fabric in inches?
Fabrics come in various widths, so a yard of the fabric refers to the length of material only. The material is unrolled from the bolt, and you should measure 36 inches or 3 feet. That’s precisely how much a yard of fabric is.
How wide is a yard of fabric?
Very simply, one yard of fabric is 36 inches long. But working out how much fabric you need for a sewing project is a little bit more complicated than that. While a yard in length is always a yard, fabric width varies according to where you’re buying it. Average widths are between 33-44 inches.
What size curtains do I need for a 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
What is the standard size for curtains?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
