Table of Contents
Typically using 200W lamps that use an estimated 1 Amp of electrical current, the average 40-tube commercial sunbed uses about 40 Amps, roughly equivalent to 9.6kW. Our selection of home sunbeds are different for two reasons.
How many amps does a 220v tanning bed use?
2 Answers. Assuming all the terminals are rated for 75°C, 4/0 conductors should handle 220 amperes @ 240 volts. If the tanning bed doesn’t actually pull 220 amperes (which I’m sure it doesn’t). You should check the nameplate or manufacturer’s installation instructions, to determine the actual electrical requirements.
How many watts is a stand up tanning bed?
The bulbs used in the case of stand up tanning beds are 160 Watts, whereas those used in lay-down tanning bed variants use 100 to 120 Watts. More power wattage bulb translates to increased intensity of UV rays which in turn increases the melanin production in the body.
How many watts is a Level 4 tanning bed?
LEVEL 4 sunbeds offer the following: 12,500 total bed wattage. Less UVB (burn ray)/higher UVA (bronzing ray) than Level 3 sunbeds. 8 -12 minute tanning session. 600w high-pressure client-controlled facial and shoulder lamps.
What size breaker do I need for a 220v tanning bed?
The power sources most likely needed to power your home tanning bed will be one of the three NEMA 5-15R, NEMA 5-20R, or NEMA 6-20R receptacles. 15 Amp Circuit Breaker Required for a bed with 16 lamps or less.
How many volts does a tanning bed use?
Residential tanning beds require either a 120 Volt or 240 Volt power source, so be sure to find out which is required for your bed.
What is the difference between a 110V and 220V tanning bed?
In a word, yes. The difference is related to the amount of tanning light produced. If the two beds produce the same level of tanning light, the difference between the beds is the amperage required to operate the bed. The lower voltage bed will require more current for the same level of tanning light.
How long can you tan in a stand up bed?
A good period of time spent in this kind of bed should be a maximum of 15 minutes only. Increase the time if your skin adapts the rays.
What is the best way to get a tan in a stand up bed?
Raise your arms over your head to get an even tan. These are for you to hold onto so light hits your underarms. If these handles aren’t there, hold your hands up to get your tan as even as possible. Remember that you can move freely in a stand up bed, so adjust your pose to get the tan you want.
Can you use tanning oil in a stand up bed?
If you’re still wondering if you can use oil for tanning in a stand-up bed, the answer is yes. However, they’re many risks involved because oils attract more UV rays to your skin and don’t contain SPF.
What is a Level 5 tanning bed?
The level 5 tanning beds are our highest-intensity and highest-quality tanning beds. Sessions are six to ten times stronger than Level 1. The minimal UVB output of this high-pressure bed means that it is likely to cause much less dry skin, nor does it accelerate the exfoliation process like conventional tanning.
Do Level 2 tanning beds work?
Level 2 tanning beds are very similar to Level 1 beds in both lamps and pricing, but they typically offer specific facial lamps and arm lamps designed to tan these odd areas that Level 1 tannings beds do not offer. The results from these high pressure Levels are awesome, with faster tanning times and darker tans.
What does Level 1 tanning bed mean?
Level 1: Our lowest level bed meaning it has a lower intensity when it comes to the UV rays. This bed is perfect for someone who burns very easily as it is a great way to get started with your tanning routine! However, this bed is also amazing for someone who is looking to deepen their tan for a lasting glow.
Can you use an extension cord with a tanning bed?
The instructions that came with the tanning bed probably say not to use an extension cord and doing so would void the warranty. You can probably get a 220 Volt appliance cord at your home store or an electrical supply company but I wouldn’t recommend that.
What is a 220 plug?
220-volt outlets are the most powerful plugs that you’ll find in most residential homes around the United States. These plugs are meant for ovens, dryers and other high-powered appliances that you simply can’t power with a standard 110V outlet.
How do you wire a 220V into a 110?
To convert a 220V appliance, you have to connect it to a transformer. You have to plug the AC transformer into the 110V outlet. Once this is done, it becomes a simple matter of plugging the 220V appliance into the outlet of the transformer.
Does a tanning bed need a GFCI?
Nona, as you have stated, the tanning bed requires a dedicated 220 volt circuit. Depending on the location, your tanning bed circuit may be required to have GFCI protection, which may be provided by installing a GFCI circuit breaker that is compatible with the electric panel.
Is there an adapter for 220 to 110?
An adapter that plugs into a standard 220-volt receptacle and allows you to use a 110-volt plug costs about $30. Commonly called a gas range adapter, it’s an easy and effective way to convert a 220V receptacle for use as a 110V outlet when the outlet is behind a range and safely out of the way of moisture.
