Table of Contents
Hardwood flooring can be re-sanded up to 10 times, depending on how bad the floor is and how skilled the person doing the sanding is. It costs about $2.50 per square foot to refinish a floor, plus $50 an hour for patching and thresholds.
Can you sand hardwood floors too much?
Too much sanding can wear them down until they’re too thin. When you refinish hardwood too many times, it becomes less structurally sound and more likely to crack. After a few refinishes, it’s probably time to get a full replacement.
How many times should you sand a floor?
Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper. However, some engineered floors cannot sustain more than one heavy-duty sanding, as they may have a surface veneer of only twice that thickness. Refinishing these floors more than once poses a risk of wear-through.
How often should you sand hardwood floors?
Generally, you should do sanding after 10, 15, or 20 years from the time of installation. After that, you can sand it after every 10 years. The number of times you can sand your hardwood floor in its lifetime depends on how thick the solid or top layer of the engineered flooring is.
How many times can you refinish 3/4 hardwood flooring?
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.
How many times can you refinish solid hardwood floors?
Hardwood flooring can be re-sanded up to 10 times, depending on how bad the floor is and how skilled the person doing the sanding is. It costs about $2.50 per square foot to refinish a floor, plus $50 an hour for patching and thresholds.
Can you refinish 1/4 hardwood floors?
Since most hardwood planks are manufactured with tongue and groove to interlock, it is necessary to leave at least 1/8 of an inch of wood at the top of the board, above the tongue and groove, for a complete refinish. It may be possible to refinish the floors if the boards are thinner than 1/8 of an inch.
Can hardwood floors be sanded and refinished?
Flooring experts estimate that hardwood floors can be sanded for refinishing up to 10 times, depending on the thoroughness of the sanding and the level of wear and tear on the floor. Situations differ, but you may not be able to refinish your hardwood floor more than 10 times.
How long does it take to sand a floor with an orbital sander?
How long does it take to sand a floor with an orbital sander? Unless your floor is in flat and in very good condition, an orbital sander is going to increase your refinishing time but 2-3 times. Let’s say 2-4 days per room as opposed to 1-2 days with a full sanding kit. For handheld orbitals, double that again.
How long does it take to sand a floor with a floor sander?
So how long does it take to sand a floor? If you’re using both the electric sander and the edger in 140 square-foot floor space, it will take you roughly 5 hours to do three sanding passes. Another thing you must take into account is how old your house is.
What is the best time of year to refinish hardwood floors?
If you are in the market to have your hardwood floors refinished this summer, then you might want to consider having it done while you are on vacation.
How long do refinished hardwood floors last?
How long will my new finish last? On average, a hardwood flooring finish lasts approximately ten years.
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
How much does sanding remove?
Engineered and Solid Boards The amount of wood you remove when sanding a floor depends on the coarseness of the paper you use, but it can be as much as 1/16 inch with the coarsest paper.
How do you tell if hardwood floors can be refinished?
Water Test Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
How many mm does floor sanding remove?
In view of this, it is accepted that with normal 19 mm thick flooring, centre milled and with about 6 mm of timber above the tongue, that up to 1.5 mm can be sanded off the boards, and for the floor to still be considered a new floor.
Can all wood floors be refinished?
The truth is, not all hardwood floors can be refinished. Although most common problems can be addressed and fixed without replacing the entire floor, there are some exceptions.
How thin can you sand hardwood floors?
If it measures between 3/16 and 1/8 inches, you should sand with extreme caution, preferably with an orbital sander. Refrain from sanding if the thickness is less than 1/8 inch.
How much does it cost to redo wooden floors?
According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor. Roughly 80 percent of the cost to refinish hardwood floors comes from labor.
