Table of Contents
3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
What size house will a 3 ton AC unit cool?
For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.
Is a 3 ton air conditioner enough?
Pro Tip: as a rule of thumb, the maximum AC unit size you need to install should not be more than 15% more than the BTU’s you need to cool your house. This means that if your house requires a 24,000 BTU unit (2 tons), you should not install one that is larger than 30,000 BTU’s (3 tons) to maintain energy efficiency.
What size AC do I need for 2000 square feet?
Step 5: Match your square footage to an HVAC size chart Home Sq Footage Air Conditioner Size (tons) 600 – 1,000 square feet 1.5 tons 1,000 – 1,500 square feet 2 tons 1,500 – 2,000 square feet 3 tons 2,000 – 2,500 square feet 4 tons.
What size air conditioner do I need for a 3000 square-foot house?
The recommended capacity for a home that is 1,201 to 1,500 square feet is 2.5 tons. For a home 1,501 to 1,800, the recommended capacity is 3 tons. For a 2,000 square-foot home, the best AC capacity is 3.5 tons. Since larger homes are costlier to cool, you’ll need a 5-ton unit to cool a 3,000 square-foot home.
How much should a 3 ton AC unit cost installed?
AC Installation Costs by Tons Central Air Conditioner Size AC Unit BTU AC Unit Only 2.5 Tons 30000 BTU $2,895 3 Tons 36000 BTU $2,920 3.5 Tons 42000 BTU $3,550 4 Tons 48000 BTU $3,650.
What size air conditioner do I need for a 2300 square-foot home?
ZONE 1 ZONE 5 2.5 Tons 1201 – 1500 sf 1401 – 1650 sf 3 Tons 1501 – 1800 sf 1651 – 2100 sf 3.5 Tons 1801 – 2100 sf 2101 – 2300 sf 4 Tons 2101 – 2400 sf 2301 – 2700 sf.
Is it better to undersize or oversize AC?
A system properly matched to cooling loads, or even slightly undersized, will dehumidify better because it will run longer, exposing cold coils to the damp airstream for more hours of the day; removing more water (aka, “humidity”)from the airstream.
What size AC unit do I need for a 1800 sq ft house?
Here’s some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.
What size AC unit do I need for a 1200 square foot home?
STEP 1: Determine how many BTUs of heating and tons of AC you need House Square Footage BTUs Needed 500 – 700 14,000 700 – 1,000 18,000 1,000 – 1,200 21,000 1,200 – 1,400 23,000.
How many square feet does a 3 ton unit cover?
3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
How much does a 3 ton Rheem AC unit cost?
Rheem AC Prices by Unit Size Unit Size Cooling Area Installed Cost 2 Tons 1000 – 1300 sqft $2,365 2.5 Tons 1300 – 1600 sqft $2,550 3 Tons 1600 – 1900 sqft $2,845 3.5 Tons 1900 – 2200 sqft $3,174.
How much does it cost to replace a 3.5 ton AC unit?
New AC unit cost recap When it comes to a 3.5-ton AC unit cost, you will pay around $3,500 to $3,700. A 4-ton AC unit cost is $3,700 to $3,800 on average. When it comes to a 5-ton AC unit cost, you will see pricing around $3,800 to $4,000.
What happens if you oversize an air conditioner?
An oversized HVAC unit can make your home’s inside temperature uncomfortable. An HVAC system with excess capacity can heat or cool your home faster, but that speed often results in a couple of other issues. As a result, you could end up with a number of hot or cold spots throughout your home.
What SEER AC should I get?
For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it’s a balance between the money you’ll spend for the unit and the amount you’ll save on utility costs.
What is the difference between a 14 SEER and a 16 SEER?
The higher the SEER rating, the more efficient your system should be. A 16 SEER unit is about 13% more efficient than a 14 SEER. For every $100 you spend to cool your home with a 14 SEER, you could save $13 on your monthly bill by upgrading to the 16 SEER unit.
Is it cheaper to replace furnace and AC together?
Adding a furnace during your air conditioner replacement will cost a lot less, around $1,000 to $3,000. The only time it really makes sense to wait to replace your furnace is if it is less than 10 years old. This way, the furnace will most likely last until the next time your air conditioner needs to be replaced.
How long should a central AC unit last?
Though the lifespan of a home air conditioner varies based on many factors, those that are well-maintained should last 10 to 15 years. And by completing regular checkups and repairs – both big and small – many systems can last even longer.
How much does a 3 ton Lennox AC unit cost?
Lennox AC Units Priced by Unit Size Unit Size Cooling Area Installed Cost 2 Tons 1000 – 1300 sqft $3,399 2.5 Tons 1300 – 1600 sqft $3,575 3 Tons 1600 – 1900 sqft $3,798 3.5 Tons 1900 – 2200 sqft $4,275.
What size air conditioner do I need for a 2400 square foot home?
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.
