Table of Contents
3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
Is a 3 ton air conditioner enough?
Pro Tip: as a rule of thumb, the maximum AC unit size you need to install should not be more than 15% more than the BTU’s you need to cool your house. This means that if your house requires a 24,000 BTU unit (2 tons), you should not install one that is larger than 30,000 BTU’s (3 tons) to maintain energy efficiency.
What size AC do I need for a 2000 square foot home?
Step 5: Match your square footage to an HVAC size chart Home Sq Footage Air Conditioner Size (tons) 600 – 1,000 square feet 1.5 tons 1,000 – 1,500 square feet 2 tons 1,500 – 2,000 square feet 3 tons 2,000 – 2,500 square feet 4 tons.
What size house will a 3 ton AC unit cool?
For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.
What size air conditioner do I need for a 3000 square foot house?
The recommended capacity for a home that is 1,201 to 1,500 square feet is 2.5 tons. For a home 1,501 to 1,800, the recommended capacity is 3 tons. For a 2,000 square-foot home, the best AC capacity is 3.5 tons. Since larger homes are costlier to cool, you’ll need a 5-ton unit to cool a 3,000 square-foot home.
Is it better to undersize or oversize AC?
A system properly matched to cooling loads, or even slightly undersized, will dehumidify better because it will run longer, exposing cold coils to the damp airstream for more hours of the day; removing more water (aka, “humidity”)from the airstream.
What size air conditioner do I need for a 2300 square foot home?
ZONE 1 ZONE 5 2.5 Tons 1201 – 1500 sf 1401 – 1650 sf 3 Tons 1501 – 1800 sf 1651 – 2100 sf 3.5 Tons 1801 – 2100 sf 2101 – 2300 sf 4 Tons 2101 – 2400 sf 2301 – 2700 sf.
How much does a 3-ton Rheem AC unit cost?
Rheem AC Prices by Unit Size Unit Size Cooling Area Installed Cost 2 Tons 1000 – 1300 sqft $2,365 2.5 Tons 1300 – 1600 sqft $2,550 3 Tons 1600 – 1900 sqft $2,845 3.5 Tons 1900 – 2200 sqft $3,174.
How much is a 3-ton AC unit?
AC Installation Costs by Tons Central Air Conditioner Size AC Unit BTU AC Unit Only 2.5 Tons 30000 BTU $2,895 3 Tons 36000 BTU $2,920 3.5 Tons 42000 BTU $3,550 4 Tons 48000 BTU $3,650.
What SEER AC should I get?
For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it’s a balance between the money you’ll spend for the unit and the amount you’ll save on utility costs.
What size AC unit do I need for a 1800 sq ft house?
Here’s some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.
Is the a big difference between a 2.5 ton and 3 ton AC?
The general guideline is a 2.5 ton unit for a home that’s 1,500 to 2,000 square feet. A 3 ton unit is ideal for a home that’s 2,000 to 2,500 square feet.
What size AC unit do I need for a 1200 square-foot home?
STEP 1: Determine how many BTUs of heating and tons of AC you need House Square Footage BTUs Needed 500 – 700 14,000 700 – 1,000 18,000 1,000 – 1,200 21,000 1,200 – 1,400 23,000.
What happens if you oversize an air conditioner?
An oversized HVAC unit can make your home’s inside temperature uncomfortable. An HVAC system with excess capacity can heat or cool your home faster, but that speed often results in a couple of other issues. As a result, you could end up with a number of hot or cold spots throughout your home.
Do I need a 4 ton or 5 ton AC unit?
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size.
What is the difference between a 14 SEER and a 16 SEER?
The higher the SEER rating, the more efficient your system should be. A 16 SEER unit is about 13% more efficient than a 14 SEER. For every $100 you spend to cool your home with a 14 SEER, you could save $13 on your monthly bill by upgrading to the 16 SEER unit.
What happens if my AC unit is too small?
What Happens When Your AC is Too Small. If your air conditioning system is too small for the space that it is installed in, then it won’t have an efficient enough output. This forces the system to operate far longer than it is designed to, to try to keep your home cool.
What size furnace do I need for a 3 ton AC unit?
In the case of a 1500 sq. ft. home, the air conditioner would need to be 37,500 ÷ 12,000, which comes out to about 3 tons. For the furnace, an 80% efficiency unit would need a BTU output of about 37,500 × 0.8, which is about 47,000 BTU.
How do I know if my AC unit is undersized?
5 Signs of an Undersized Air Conditioner Your AC Never Stops Running. Low Airflow. Your Home Is Never Cool Enough. Your Home Has Temperature Inconsistencies Throughout. High Energy Bills.
Is Rheem or Ruud better?
The major difference in the Rheem vs. Ruud AC comparison is that Rheem units tend to be quieter while Ruud units appear to have more solid construction. Find a local contractor who can help you determine which brand best fits the needs of your home.
Which is better Rheem or Lennox?
Both companies carry top-quality products that are energy efficient and economical, but Lennox has many more options than Rheem, offering you much more variety. When doing your Rheem vs Lennox comparison, you’ll also notice that both brands are available at many popular home improvement stores.
Is Rheem or Carrier better?
Carrier has a really good reputation in terms of quality as compared to Rheem. Unlike Carrier air conditioning systems, there is more leakage of pipes and refrigerant happens with Rheem ACs. If you do not often change the AC unit in a year or two, then Carrier will be a better choice here.
