Table of Contents
Can you reuse silver clay?
Pretty much any form of dried metal clay that hasn’t been fired—with the exception of overlay paste or oil paste—can be reconstituted to a nice, pliable working consistency again.
Is Silver Clay expensive?
The answer is easy. Silver clay is getting more expensive because the price of silver is going up. Since fine silver is the main ingredient in all PMC and Art Clay silver products, any fluctuation in the silver market can make a big difference in the price of silver clay.
Can art clay silver be torch fired?
Torch firing is a great, inexpensive, way to fire your metal clay. You can use a small butane gas torch, like a kitchen torch, to fire all the Art Clay Silver clays. The piece you fire shouldn’t be much larger than a £2 coin, and weigh no more than 25 grams.
Is Silver Clay sterling silver?
Is it really silver? In short, yes! Silver clay is either 925 Sterling Silver or 999 Fine Silver and can be hallmarked as such.
What is silver clay?
Silver clay is a material, invented in the 1990s, made up of fine silver particles (usually recycled from the photographic industry and from X-rays), an organic binder and water. The clay can be moulded, rolled, textured and shaped. There are two types of silver clay, 999 fine silver and 925 sterling silver.
What is the difference between art clay silver and PMC?
Yes, all three versions yield the same metal, 100% silver. The difference is not in the ingredients but in the shape of the particles. Original PMC is made with flake‑like particles that allow room for the binder, which gives the material its workability. PMC+ is made with a particle with more neatly defined edges.
Can you Colour silver clay?
You can add beautiful enamel to your silver metal clay with a simple butane torch. If you already torch fire your metal clay, you’ll find working with colourful enamels very easy. Beautiful colours can be added to your metal clay work using a patina solution like Liver of Sulphur.
Is gold clay real gold?
Art Clay water-based gold clay, sometimes called metal clay or precious metal clay, is made by Aida Chemical Industries in Japan: it’s a composite clay-like material, made of 95% 22K gold and 5% water-based binder. This gold can be hallmarked as 22 karat gold, once fired it is 91.7% gold and 8.3% silver.
Does silver clay shrink when fired?
When fired at 1650° for two hours, this is the strongest fine silver clay available. Well suited for items that will be worn often. 10-18% shrinkage. Offers a smooth, fine composition that’s easy to work with and manipulate.
Can you make rings from silver clay?
Cut the clay. Once you’ve added texture to your silver clay ring, you can cut it accurately to size. Use a metal clay cutting blade to cut along the measurement you made earlier. Advanced metal clay ring design: Add another element to your PMC ring with small clay cutters….
What temperature does silver clay fire?
Anything that is made of fine silver can be fired at 1650°F / 899°C for 2 hours. Remember, most silver clay is made of fine silver, so anything that applies to silver clay also applies to fine silver findings, wire, etc. Sterling silver findings can be co-fired with silver clay.
Can you fire silver clay in the oven?
Precious Metal Clay or Art Clay can be fired in any furnace that will sustain the required temperature with reasonable stability. Almost any kiln with a pyrometer, like those used for burnout or enameling, will work.
Do you need a kiln to use silver clay?
Art Clay Silver 950 must be fired in a Kiln. (It is not suitable for Torch or Gas Hob Firing).
What is silver clay made from?
Silver clay is a material used for making jewellery and decorative objects. It is made from silver that is recycled from a range of sources, including waste from x-rays and the photographic industry. The silver particles are mixed with an organic binder and a bit of water and the clay comes pre-packaged ready to use.
How do you make silver clay jewellery?
Silver clay is air drying so it’s important that you wrap any clay you’re not working with up tightly straight away to keep it from drying out. Put the clay you are going to use in some cling film and knead it gently for a few seconds, just to soften it a little before you start working.
Which clay is best for jewellery making?
Recommendations. The best brands of polymer clay for making earrings and jewelry are Sculpey Premo, Fimo Professional, and Kato Polyclay. Or, if you want a softer clay with a matte finish, consider Sculpey Souffle. Additionally, if you want translucent and specialty colors, try Cernit.
What is the best silver clay?
Sterling silver clay is the strongest silver clay on the market because of the additional copper content.
How pure is silver clay?
Silver metal clay. Fine silver metal clay results in objects containing 99.9% pure silver, which is suitable for enameling.
How much is metal clay?
Typical costs: A 20 gram package of silver metal clay runs around $25-$40; 50 gram packages are $65-$75. Gold metal clay runs $230-$280 for 5 grams and $350-$400 for 10 grams. A small hand-crafted solid bead would use about two grams of clay, about $2.50-$4 in silver and $70-$115 in gold metal clay.
Can you mix PMC3 with PMC Flex?
PMC3 can be used for mixed media jewellery; it can be combined with dichroic glass, synthetic gemstones, some natural gemstones and ceramics. You can also combine PMC3 with PMC Flex. PMC3 can be torch, as well as, kiln fired.
How long does silver clay take to dry?
Finished pieces should be allowed to dry out fully – give between 24-48 hours in a dry, warm atmosphere. Alternatively, the clay can be dried in an oven at 180°C/330°F for at least 10 minutes or with a 1200w hair dryer within 5-10cm of the piece for 10-15 minutes.
