Table of Contents
STEP 2: Measuring Depth To measure the depth, start at the wall (not the backsplash) and measure to the edge of your countertop. Your counter-depth measurement should be about 24-25 inches. This dimension is equivalent to the depth of the refrigerator box, excluding the refrigerator doors and handles.
What is considered counter-depth?
“Counter-depth” refers to the distance between the front of your kitchen countertops and your back wall or backsplash. These refrigerators are usually 24–30-inches deep, shallower than most fridges, to line up with the end of your cabinets and fit in nicely with most modern kitchen designs.
What is the difference between standard and counter-depth?
standard depth refrigerators is depth dimension. Counter depth fridges fit nearly flush with your cabinetry, but measure smaller in depth than standard size fridges. For certain counter depth models, a larger width and height make up for some lost storage.
What is a normal kitchen counter-depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How much clearance do you need for a counter-depth refrigerator?
Make sure to account for at least an inch of space between the back of the fridge and the wall to ensure proper ventilation. Total depth of a counter-depth refrigerator is typically under 30 inches, including the doors and handles.
Should refrigerator be flush with cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What are standard countertop dimensions?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
Why is counter-depth more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Why are counter-depth so expensive?
Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.
How far should a kitchen counter overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
Why are fridges not counter-depth?
While the refrigerator box is technically counter depth, all fridges need clearance in back, doors, and handles. Rather, it is a matter of establishing a common frame of reference for what we mean by counter-depth. In any case, these fridges are shallower than your average fridge, which can run several inches deeper.
Is counter-depth deeper than standard?
The distance from your backsplash to the front of your kitchen counters is one way to gauge your “counter-depth.” To fit within this space, counter-depth fridges are shallower than a standard-depth fridge, with a typical range of 23 to 27 inches deep.
How far should a refrigerator be away from the wall?
You should leave between 12 to 12 of clearance between the walls and cabinets. You should leave at least 1 inch of clearance in the rear. 1-2 Inches is ideal because it will help push the fridge out slightly away from the wall.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
Do fridges usually stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
What is the difference between a regular refrigerator and a counter-depth refrigerator?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
Is Frigidaire a good brand?
According to the community survey website Ranker, consumers have Frigidaire ranked as the best appliance brand by a wide margin. Their side-by-side refrigerators have been recognized by Consumer Reports as exceptionally reliable. Frigidaire’s offerings are both basic/easy to use and price-friendly.
