Table of Contents
Look for the stamp on the inside of the tank lid or along the back inside of the tank. Pre-1982 toilets likely hold 5 to 7 gallons, toilets between then and 1993 likely hold 3.5 gallons, and new toilets hold 1.6 gallons or less.
How many gallons does a toilet use?
Generally speaking, the older the toilet, the more water it uses. Toilets built before 1982 use 5 to 7 gallons per flush. Now, toilets are designed to flush using only 1.6 gallons of water.
How big is a standard toilet tank?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches.
How many gallons is a low-flow toilet?
Government plumbing standards for low-flow toilets specify that they use no more than 1.6 gallons per flush; there are also high-efficiency models that use 1.28 gallons or less per flush.
Does flushing the toilet use a lot of water?
Flushing is the biggest water hog in the house. Older, conventional toilets can use 5 to 7 gallons per flush, but low-flow models use as little as 1.6 gallons. Since the average person flushes five times a day, the gallons can really add up.
How deep is a toilet tank?
Toilets have many standard measurements, including height, width and depth or length. The width is 15 inches, height is just over 18 inches and the depth is 18.9 inches. The toilet tank is typically 10 inches wide (from the front to the back) and around 26 inches wide.
Do all toilet tanks fit all bowls?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
How do I know the size of my toilet tank?
Measure from the floor to the top of your toilet seat. Then measure from the floor to the top of your toilet’s tank to make sure your new toilet can fit into the same space or under any an over-the-toilet storage racks that you do not want to get rid of.
Do low-flow toilets clog more easily?
Low-flow toilets, especially older models, can end up getting clogged easily. This is because they use less water, 1.2 gallons, compared to a standard toilet, which uses 1.6 gallons per flush. This means there’s less water to push waste down the drain pipe of a low-flow toilet and out to the sewer line or septic tank.
Are high flow toilets illegal?
In the Energy Policy and Conservation Act, passed in 1994, Congress mandated that toilets sold in the U.S. use no more than 1.6 gal. Soon they wanted the thunderous whoosh of their old, high-flow toilets back. Trouble was, the 1994 law made selling them illegal in the U.S., punishable by a fine or even imprisonment.
What is the purpose of a low-flow toilet?
Low flow, or low flush toilets, are high-efficiency toilets that reduce our water consumption per flush. They are worth it because they help you save water, and money, in your home.
Should you flush every time you pee?
People should still flush their toilets at least once a day. “Things like to grow in urine and after a while the chlorine will inactivate in the toilet bowl water. It will being to bubble away and things will begin to grow. The odor will increase so it can get disgusting, smell bad and stain your toilet,” he said.
Does putting a brick in the toilet save water?
Most household bricks are meant to withstand water and elements, so they may not disintegrate rapidly. Well, placing a brick in the toilet can save a small amount of water per flush as the brick lessens the tank capacity creating a less Gallons Per Flush (GPM), but it may affect the overall performance of the toilet.
How much water is used for a 5 minute shower?
According to the U.S. Environmental Protection Agency (EPA), a full bathtub requires about 70 gallons of water, while taking a five-minute shower uses 10 to 25 gallons.
Can you replace a 14 inch rough in toilet with a 12 inch rough in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
How much space do you need between toilet and vanity?
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″. If you’re placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.
Are toilet tanks sold separately?
Residential toilets usually have two parts — tank and bowl. Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank.
Can you replace a toilet tank with any brand?
This is a fairly common question, and the answer is usually no. It’s best to stick with the same manufacturer of your current toilet if you’re buying the replacement tank on its own. Though a toilet tank may look similar on the outside, and in some cases, even on the inside, it’s unlikely to perfectly match up.
Can you mix and match toilet bowls and tanks?
While there are a few models that can interchange tanks and bowls, most are configured to work optimally as a set as indicated in our Product Showcase. In fact, if you do your own mixing and matching, the toilet may not flush at all! Gravity Fed and Pressure Assisted tanks and bowls cannot be mixed.
