Table of Contents
Water-based polyurethanes are thinner liquids, which means that they will require four to five coats. Oil-based polyurethanes are thicker, and will need between three and four coats. The total number of coats will depend on the amount of traffic and use received by that particular surface.
Is 2 coats of water based polyurethane enough?
2 coats of polyurethane are enough to protect the wood from moisture and contaminants. However, for added protection against water damage, about three or four coats of polyurethane would suffice.
How long do you wait between coats of water based polyurethane?
Allow product to dry a minimum of 1-2 hours between coats. Sanding between coats is not required for adhesion as long as the time between coats is less than 6 hours. However, screening or sanding between coats usually produces a smoother better looking finish. A minimum of 3 coats of finish are recommended.
Is 4 coats of polyurethane too much?
For ideal results, you should use about three or four coats. You will also have to wait quite some time between coats, as this polyurethane takes longer to dry. No matter how many coats of polyurethane you apply, it will always be quite a time-consuming process when using an oil-based finish.
How do I get a smooth finish with water based polyurethane?
First use a degreaser cleaner like Formula 409 or Fantastik to clean away any buildup of grease or cooking oil. Scuff-sand the old finish with fine synthetic wool, then seal with Zinsser SealCoat. Sand the seal coat with fine synthetic wool, then brush on two to three coats of water-based poly to complete the job.
Can you have too many coats of polyurethane?
Generally, more than 3 coats of poly doesn’t do much good. It’s really not needed nor recommended. Each additional coat needs to be buffed so you are kind of buffing off half of the previous layer. Each additional coat takes longer to try due to the added layers.
How many coats of water based polyurethane do you need on hardwood floors?
We recommend a minimum of 3 coats of water based polyurethane as it coats in thinner, but harder layers, than an oil based poly. Water based polyurethane dries very quickly and up to 4 coats can be applied in one day. Jobs 1,500 – 5,000 sq ft, 2-4 days for completion.
What happens if you don’t sand between coats of polyurethane?
For some types of poly, nothing happens if you don’t sand between coats of polyurethane. However, most polyurethane will not adhere properly if you skip sanding dust nibs and brush marks on the finish. The polyurethane finish will eventually peel off or become deformed.
Is water-based polyurethane good?
Water-based and oil-based polyurethane each offer good protection; the biggest difference is in appearance. Polyurethane is actually the most durable hardwood floor finish. There’s debate over which finish is harder, but some experts maintain that hardness isn’t necessarily a good attribute of a floor finish.
How many coats of polyurethane are waterproof?
Polyurethane does not make hardwood waterproof, but it does provide a strong protection layer to make wood water resilient and protect your floors from scratches. To give your floors the best protection, be sure to use 3 coats of a high grade polyurethane.
What happens if you put too much polyurethane?
This is known as one of the biggest problems in the woodworking world. Runs are common for polyurethane finishes because of being slow drying. Runs can be seen when drying both water-based and oil-based polyurethane finishes. Runs can occur due to applying thick layers of polyurethane or by spreading too much.
Which is better water or oil based polyurethane?
1. Oil based polyurethane looks better. It has a more depth – both in color and shine and it looks the way we expect hardwood to look. Water based polyurethane has both a duller color and a duller finish.
How do you keep brush marks from water-based polyurethane?
Thin your polyurethane with paint thinner, mixing it with a paint stir stick. When polyurethane is too thick, the brush marks hold their shape and don’t settle out. Thinning the product provides a smoother finished surface. Experiment with different amounts of paint thinner to see what works best for you.
Can you use a roller with water-based polyurethane?
Yes, you can apply more polyurethane with a foam roller, microfiber, and mohair. The foam works well with oil-based poly. However, don’t use a foam roller when applying water-based polyurethane.
Can you wipe on water-based polyurethane?
Yes, water-based wipe-on poly is good. However, it is not a necessary product to have. Water-based polyurethane dries quickly anyway and can be wiped on, given how thin it is. So, a wiping version doesn’t really add more advantages.
How do you apply water-based polyurethane?
Applying a Water-Based Polyurethane Apply a very thin coat of polyurethane with a fine brush, foam pad, or cloth. Work with the grain, and avoid applying too much polyurethane to avoid raising the grain. The initial coat should be dry within a couple of hours, and you can then apply a second coat.
Does polyurethane darken stain?
Oil-based polyurethane will likely give the stained wood a yellow, orange, or brown tint, sometimes making it appear darker. Water-based polyurethane will not affect the color of the stained wood, though the shine of the polyurethane can sometimes cause the stain to appear brighter.
How long after staining can I apply polyurethane?
In general, you should wait between 24-48 hours for the stain to dry before polyurethane. If you don’t want to take any chances or think the stain might not be dry enough, wait an extra day before applying poly.
