Table of Contents
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
Can you use too much Thompson Water Seal?
If over-application occurs and there is puddling of the product, redistribute product within 15 minutes to a dry area or wipe off. Q: Will the formula of Thompson’s® WaterSeal® Sport Seal® or Fabric Seal change the feel of the treated surface? No. These products will not change the surface’s feel or leave it sticky.
How long does Thompson Water Seal last?
If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.
How Much Thompson Water Seal do I need?
COVERAGE Thompson’s Water Seal will cover approximately 4 m² per litre. Coverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you’re coating.
What’s the best way to apply Thompson’s Water Seal?
The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
Is Thompson water Seal any good?
– Thompson’s® WaterSeal® Clear did not alter or change the appearance of the wood. After full drying, we tested the ability to repel water. Water did bead on top of the finish and did not absorb into the wood. – As far as we can tell, Thompson’s® WaterSeal® does not prevent UV graying at all.
How long does Thompson water Seal need to dry before rain?
Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity.
Is it better to stain or seal a deck?
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage.
Should I use Thompson water Seal on pressure treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
Can you spray Thompson water Sealer?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.
Do you need 2 coats of Thompson’s water Seal?
Deck Sealing and Staining Tips Thompson’s WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.
How much area does a gallon of Thompson water Seal cover?
Approximate Coverage Material Approximate Coverage (sq. ft./gal.) Wood: Rough Sawn 100 Wood: Smooth Finish 200 Plywood 150 Wood Shingles 100.
How much does Thompson’s water Seal Cover per gallon?
That determines how many gallons of stain are required (each gallon covers up to 400 square feet).
How do you clean your brushes after using Thompson’s water Seal?
After waiting the recommended time, use a synthetic, stiff bristled brush to scrub the surface. Then use a garden hose or pressure washer to rinse away the residue.
How does Thompson water Seal work?
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.
Why is Thompson water Seal not drying?
In many cases, high levels of moisture in the air (or worse, rain) may cause the water seal to take longer to dry. Applying water sealant on wet wood or during a moment of very high humidity will not weaken the sealant, though. After two to three days, you probably won’t have any stickiness left on your wood.
What happens if it rains after you seal your deck?
Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to dry, and during that time, the sealer is vulnerable. After the rain has passed and the deck has dried, take a closer look.
How soon can it rain after applying Ready Seal?
As long as the Wood Prep and Moisture Content rules outlined above are followed (wood is clean, bare, and dry down to 12% or less), you can stain today, and it can rain within hours and the Ready Seal will not wash away.
What happens if you don’t seal stained wood?
A: If you don’t apply some kind of sealer the wood will be dried-out and lifeless. When you rub stain into wood, it brings out the grain pattern and gives the wood a more dramatic look. The final step in staining wood is to wipe off any excess, so the process leaves nothing behind.
What’s the best way to apply deck sealer?
Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.
What is the best way to seal pressure treated wood?
For fully exposed decks, a water-repellent sealer or a penetrating semi-transparent stain may provide the best finishing solution, even on wood that has been pressure treated with preservatives. Special formulations made specifically for decks are available.
What is the best sealant for pressure treated wood?
Best Deck Sealers for Pressure-treated Wood Ready Seal 520 Exterior Stain and Sealer for Wood. SEAL-ONCE Nano+Poly Ready Mix Penetrating Wood Sealer. #1 Deck Premium Semi-Transparent Wood Stain for Decks. Thompsons Waterseal Solid Waterproofing Stain. Eco Advance Wood Siloxane Waterproofer Concentrate.
