Table of Contents
How many recessed lights do you need per square foot?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.
How do you calculate how many recessed lights are needed?
Formula: total sq. footage x 1.5 = total wattage needed. Total wattage divided by 60 watts (or whichever wattage you select) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed.
Is 4 recessed lights enough?
Ideal for smaller areas 4-inch recessed lighting is ideal for installation above the kitchen sink, next to areas, or on top of your plant. Besides producing a focus light, it also brightly illuminates the space you’ve installed it on.
How many can lights in a 20×20 room?
If you have a center light fixture, you should be able to use 4 inch line voltage cans or low voltage for supplemental lighting. I would go with at least 8 three inch cans for a 20 foot room.
Can you have too many recessed lights?
“It’s too bright in here.” The culprit: Too many recessed lights. Home builders, contractors—or hey, even you—can get a little overzealous when it come to how many recessed lights go into a space. And too many can leave a living room feeling like a lobby or a hallway feeling like a runway.
How far apart should 6 inch recessed lights be?
Generally speaking, recessed lights that are four inches in size should be placed four feet apart. Six-inch lights should be placed six feet apart. In other words, the diameter of the lights equals the space between them.
How many recessed lights can you put on one switch?
The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.
How do you layout can lights in a room?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
How many lights do I need in a room?
As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.
What is the most common size for recessed lighting?
Recessed lights are categorized by their size. The most common residential sizes are 4-inch, 5-inch and 6-inch. This leads to the common question; “What is this size is actually referring to?” The answer is it’s the size of the inside diameter of the housing (aka “can”) with the trim or LED module removed.
What is the difference between can lights and recessed lights?
Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling.
Can light vs LED can light?
Since most canless lights utilize LEDs, they tend to be more energy-efficient than can lights. This is because the lack of a fixture means there aren’t holes for heat and air conditioning to escape through, and LED lights are more energy-efficient than other bulbs.
How far off the wall should you put a recessed light?
If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.
Are recessed lights outdated?
The one reason why recessed lighting is timeless because they offer the flexibility to change the finishes later. You have a can in your ceiling that stays forever. However, the finish may become outdated and can be purchased in different colors and styles to suit your needs. You can change them as often as you like.
How many LED lights can be on a 15 amp circuit?
Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.
How many recessed lights is too many?
The fix: To avoid having your kitchen ceiling look like an airport runway, the general rule to follow is: use one recessed light for every 4-6 square feet of ceiling space. The formula for spacing your recessed lights is to divide the height of the ceiling by 2.
Do recessed lights add value to home?
Does recessed lighting add home value? Recessed lighting can absolutely add home value of you take the time to place them correctly and use the right light temperature for the room. There are also ways to make recessed lighting more energy efficient which is not a bad additional benefit.
Can a room be too bright?
Too much natural light can drain the warmth out of a room, making it feel more like a doctor’s office waiting area than a comfortable, inviting space. Be sure you balance out natural light by introducing homey elements such as upholstered furniture, throw pillows, and a color palette that’s soft on the eyes.
What size recessed light for 8ft ceiling?
When spacing recessed lights, use this general rule of thumb: divide the height of the ceiling by two to get the distance the lights should be from one another. For example, an 8-foot tall ceiling should have recessed lights spaced 4-feet apart.
How far away to space can lights?
To determine how far apart to space your recessed lights, divide the height of the ceiling by two. If a room has an 8 foot ceiling, you should space your recessed lights approximately 4 feet apart. If the ceiling is 10 feet, you’ll want to put about 5 feet of space in between each fixture.
Should recessed lights be staggered?
The typical rule is to place the lights the same number of feet apart as the bulb’s diameter in inches. So a bulb with a 4-inch diameter should be 4 feet away from the next light.
