Table of Contents
The 1.5HP pump is drawing 17 Amps on initial start up for about 2 seconds (literally), and then drops to 12 Amps and hums away. Thank you to everyone for your help.
How many amps does a 1.5 HP pump use?
For example a 1.5 HP Baldor motor turning 3450 rpm draws 13.4 amps on 120 volt service.
How much electricity does a 1.5 HP pool pump use?
Calculating Pool Pump Energy Use: Each horsepower uses 746 watts. For a 1.5 hp pool pump, multiply 746 watts by 1.5 hp, for a total of 1,119 watts. Most utilities charge from 10¢ to 15¢ per kilowatt-hour, and to know kilowatt-hours, multiply watts X hours and divide by 1,000.
How many amps does a 1 1 2 HP pool pump draw?
When delivering 1/2hp to the pump, it draws 5.0 Amps. If that motor operates at its service factor of 0.8, it will draw 6.0 Amps. Most installations have motors near the maximum load.
How many amps is a Hayward 1.5 HP pool pump?
1 HP is 746 watts x 1.5 HP = 1,119 watts. 1,119watts ÷ 120volts= 9.325 amps.
How many watts does a 1.5 hp motor draw?
so, 1.5 hp motor would consume 1100 watts, inductive load, on the electric system.
What is the starting current of 1.5 hp motor?
Product Specification Brand SAIKA Power 1.5 HP Current(Amps) 0-30 A Voltage Range 0-300 V Start Cap 100-120 mfd.
How many amps does the average pool pump draw?
Pool Heat Pump: 240v, 50 amps.
How many gallons per minute does a 1.5 HP pool pump?
Pool Pump Operating Costs Pump Size GPM (varies with plumbing) Cost/Hour 1.0 HP 60 $0.06 1.5 HP 68 $0.09 2.0 HP 76 $0.12 3.0 HP 85 $0.18.
How many amps does a 2 HP pool pump draw?
A 2 hp pump won’t pull twice as many amps as our 1 hp example motor UST1102, but it will be more, about 25% more, up to 20/10 amps. The EE version of our example motor, the UCT1102 ‘The Conservationist’, uses 11 / 5.5 max load amps, or a reduction of just over 25%.
How many amps does a 1 hp inground pool pump draw?
Since it’s an aboveground pool pump it’s an uprated model and draws in the vicinity of 10 to 12 Amps at 120 volts. It might draw less depending on your plumbing.
What size breaker do I need for pool pump?
A typical above ground pool pump will require a 20-amp breaker and use #12 gauge wire to deliver the electricity.
How many amps does a variable speed pool pump use?
IntelliFlo i2 Variable Speed Pool pump is hydraulically engineered to provide maximum performance on a 15-amp breaker.
What size of generator is needed for 1.5 hp well pump?
Convert horsepower to watts by multiplying the constant value 746 with the horsepower. If you have a 1.5HP pump, the corresponding wattage is 1119 watts. The generator needs to provide twice the power to start and run your well pump. With the example above, you need a generator that has around 2238 watts.
How many watts does a 1.5 hp submersible pump use?
so, 1.5 hp motor would consume 1100 watts, inductive load, on the electric system.
What is the meaning of 1.5 hp?
The horsepower (hp) is a unit in the foot-pound-second ( fps ) or English system, sometimes used to express the rate at which mechanical energy is expended. It was originally defined as 550 foot-pounds per second (ft-lb/s). A power level of 1 hp is approximately equivalent to 746 watt s (W) or 0.746 kilowatt s (kW).
How many amps does a 1.5 kW motor draw?
Three Phase Motors MOTOR RATING HP 0.75 kW 1 3.2 1.1 kW 1.5 4.5 1.5 kW 2 5.8 2.2 kW 3 8.7.
How many amps does a 1.5 hp submersible pump?
1.5 hp is 1152 watts. If you use 120 volts, the current is: 9.6 amps.
How many amps does a 1.5 HP 3 phase motor draw?
AC Motor Full Load Amperes HP 200 Volts 440-480 Volts 3/4 3.7 1.6 1 4.8 2.1 1.5 6.9 3.0 2 7.8 3.4.
Does a pool pump use a lot of electricity?
Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.
How many amps is a Intex pool pump?
Intex fitler pumps draw 1.3 to 4.0 amps of current. Normal households have 15 amp outlets.
Can I replace my 1hp pool pump with a 1.5 HP?
You cannot replace a 1.0 full rated motor with a 1.0 uprated motor. However, you can replace your 1.0 Full rated motor with a 1.5 HP uprated motor. This is because they both will have the same total horsepower.
What happens if your pool pump is too big?
Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.
How many gpm does a 2 HP pump?
Number of submersible well pump stages determine pump lift capacity Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity Water Pump HP Nr. of Pump Stages GPM Flow Rate Capacity 1 1/2 HP 11 4 – 40 GPM (varies by TDH) 2 HP 14 4 – 42 GPM (varies by TDH) 3 HP 19 4 – 43 GPM (varies by TDH).
