Table of Contents
A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.
How high off the floor should a shower curtain be?
The curtain rod should be installed around 75 to 77 inches from the floor, since a standard shower curtain is 72 inches long. The shower curtain can’t touch the floor.
Is the shower curtain supposed to touch the floor?
No, your shower curtain is not supposed to touch the floor. The simple reason for this is it will help prevent the bottom of the curtain from collecting too much moisture and dirt. Therefore, leave at least two inches of space between the curtain hem and the bathroom floor.
How far into the tub should a shower curtain hang?
Standard shower curtains are 72 inches long by 72 inches wide. If your shower has a tub, it’s recommended that the shower curtain and liner, if you’re using one, hang below the lip of the tub at least 6 inches.
Where should a shower curtain liner fall?
The rough side of the liner should face the backside of the shower curtain. The smooth (good) side of the liner should be visible when you are standing in the tub.
Should shower curtain be higher than shower head?
The rule of thumb is to put the shower curtain rod three to five inches higher than the shower curtain’s length. At the least, you want the curtain to hang at least six inches past the rim of the tub.
Should shower liner be shorter than curtain?
The length of your curtain is really less about sanitation issues than it is about style and functionality. If you choose, you can keep your curtain long enough to touch the floor, as long as your inner liner reaches at least 6 inches into your tub to reduce any potential water leakage.
Should you keep your shower curtain open or closed?
A shower curtain should be closed when not in use. Once you leave it open, mold and mildew can develop inside the folds. This is because an open shower curtain folds on itself which makes causes the water to get trapped between the plastic and makes it hard to dry. This can eventually cause mold to grow.
What do you do when your shower curtain is too short?
These 3 Cheap Hacks Can Fix The Most Annoying Shower Curtain Problem Link Extra Sets Of Shower Rings Together. Use String Or Ribbon Instead of Shower Rings and Adjust the Length to Fit. Use Extra-Long Shower Curtain Rings.
What is standard shower curtain length?
The standard shower curtain size is 72 x 72 inches. Standard shower curtain length extends to the floor and covers the tub. Of course, if you have a custom shower, standard curtain panel sizes may not be the right fit for your shower.
Do cloth shower curtains go inside the tub?
Ideally, the curtain should be hanging inside the tub, keeping the water from getting out of your shower area. Hence, if you’re not using your bathroom, you can put it outside to hang. Indeed, shower curtains have a significant role in protecting the tiles outside your shower area.
Where should shower curtain rod be placed?
For best fit, shower curtain should be 6″ – 12″ wider than shower rod. Mount rod approximately 3″ inside the point a straight rod is normally mounted. The midpoint of the rod should extend several inches past the outside rim of the tub. Depending upon tub model, mount rod between 6″ and 8″ from center line of the tub.
How do you hang a shower curtain on a walk in shower?
As a general rule, when hanging shower curtains in a walk-in shower, the bottom of the curtains should be ½ inch above the floor. Such height will keep water and suds from going all over the bathroom floor outside the shower area while you’re showering but still provides enough space for easy mopping and cleaning.
Why are there two shower curtains?
Having two shower curtains makes for a unique aesthetic. There are two general reasons you would want to use two shower curtains—you have a large shower area to cover or you wish to design a distinctive space. If you want to make a big impact on the overall look of your bathroom, then this is the way to do it.
Why do hotels have cloth shower curtains?
They are decorative, in keeping with the decorative scheme employed in the bathroom. They also provide privacy for the person showering. However, they also are available in clear plastic. As others have said, having a clear curtain and/or liner allows light into the shower.
Which side of the shower liner faces out?
When hanging a shower curtain liner, the side that is not smooth or shows “finishes” should face out of the tub. You can tell which side is smooth by looking at the liner’s seams, labels, or grommets.
What is the length of an extra long shower curtain?
Extra Long (72″ x 96″) 100% Cotton Striped Single Shower Curtain.
How are shower curtains measured?
Measure the width of the entire space the curtain will fit over. This typically is the front section of the shower or bathtub. Measure in inches, then choose a rod that fits the opening. Keep in mind that standard shower curtains are 70 or 72 inches wide.
Are all shower curtains the same length?
There are 3 standard shower curtain sizes, and they are 70 x 70 inches, 70 x 72 inches, and 72 x 72 inches. One of these 3 sizes will work for the showers found in most homes. However, there are exceptions, and you may need a different size if you have an oversized shower, stall shower, or a curved curtain rod.
Can you cut the bottom of a shower curtain liner?
Where the shower liner hits the tub and where it ripples, as a result of being too wide, are breeding grounds for mold and mildew. One simple solution: trim a few inches from the bottom and sides so it fits the tub perfectly without bunching.
How long should a shower curtain be for a walk in shower?
For shower stalls and walk-in showers, you will need shower curtains that are 54×72 inches or 54×78 inches in size. Long curtains are a good fit for these types of showers to keep the water from splashing outside.
How do you shorten a shower curtain liner?
With a pair of sharp scissors, slowly cut the liner. Move in small, deliberate motions across the liner so that it doesn’t end up with a ragged edge. Smooth the liner as you cut to ensure it stays even as you work. Then hang it on the suspension rod.
