Table of Contents
Your trucks should be loose enough that you don’t need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider’s preference. That being said, they should be tight enough that the kingpin won’t fall out and loose enough that the bushings don’t burst.
Are my trucks supposed to wiggle?
Loose trucks are not normally a danger, though tight trucks sometimes can be. The tighter the truck, the tighter the turning radius. Most skaters prefer their trucks somewhere between ridiculously tight or loose. And, almost everyone changes their taste in truck adjustment as their skateboarding develops and evolves.
Why are my trucks so wobbly?
Wobbly skateboards are caused by bushings being too soft or the skateboard trucks being too loose. With just a few minor adjustments to the kingpin nut, you can solve this problem. It’s really easy to fix actually and some don’t even consider it a problem. 3 Why Are My Skateboard Trucks so Loose?.
Is it easier to turn with loose trucks?
Loose trucks are harder to skate than tight trucks. There, I said it. That’s not to say that tight trucks are easier, or that loosening up the kingpin nut a few turns is going to make you lose all your tricks. You can’t just unscrew the nut to get that.
Should I tighten the trucks on my skateboard?
They need to regularly be tightened, as they come loose over time. Properly tightened trucks make your board ride smoother and cleaner and helps tune the board to your turning style. They also give you more balance. If you use your board regularly, learning to tighten your own trucks are essential.
What are the benefits of loose trucks?
If you often press down on the tail for turning, then it is tied to loosen the kingpin nut. If you skate with tight trucks, loosening them will improve the flow of your skateboarding. Loose trucks also allow for a better landing if the drop wasn’t perfect.
How loose should your trucks be on roller skates?
Trucks should not be loose enough for you to be able to wiggle them with just your fingers, nor should they be so tight that you cannot move them at all with full hands on the wheels.
How tight should my wheels be on skateboard?
Your skateboard wheels should be tight enough that they spin freely. However, you don’t want the wheels so loose that they wiggle on the truck’s axle. If the wheel stops spinning after a few seconds, you’ll want to loosen them.
Why do skateboards rattle?
Your Bearings Make a Squeaky or Rattling Noise It’s best to get all your bearings out and lube them but you can also identify which bearings are loud. Just spin your wheels and see which ones are making noise. Cleaning your bearings will mean you have to do it more often once you did it the first time.
What’s the difference between loose and tight?
Tight means fixed or firmly in place, fully stretched or fitting close to the skin. In slang, it means very good or emotionally close. 2. Loose means not fastened or fixed in place and not tight-fitting.
What trucks do pro skaters use?
10 Best Skateboard Trucks Independent Trucks Stage 11. Independent trucks very durable skateboard trucks but have a reputation for being heavy. Thunder Trucks. Venture Trucks. Tensor Trucks. Grind King Trucks. Paris Trucks Co.
How wobbly should a skateboard be?
The trucks should be as loose as you feel comfortable when you’re first starting out. Be sure not to compress the bushings when adjusting your trucks. Once you’re comfortable with your board, loosen your trucks up a hair so that they feel slightly uncomfortable.
What happens if your trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you’re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
Should my trucks be loose or tight?
Your trucks should be loose enough that you don’t need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider’s preference. That being said, they should be tight enough that the kingpin won’t fall out and loose enough that the bushings don’t burst.
Do loose trucks cause speed wobble?
CJ: For starters, speed wobs can be caused by a number of different reasons. A common one being loose trucks. Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph. If you’re going faster than that, then you just might want to tighten your trucks.
How do you break in a truck?
Spend your first few skate sessions either skating on flat ground or basic riding in a mini ramp. Adjust the trucks after a few days of breaking in the new bushings. As soon as your board starts to feel normal—no tightness or awkward pulling off to one side—tighten the trucks as you would normally ride them.
How do I know if my roller skates are too loose?
You don’t want the nut to be completely tightened when you start skating; otherwise, your wheels won’t roll smoothly and you won’t be able to pick up any speed. However, if it’s too loose, you’ll feel wobbly while you’re rolling.
Should I loosen my roller skate wheels?
The wheel should spin freely. If the wheel doesn’t spin or is jerky when it spins, the nuts are to tight and need to be loosened.
Why does my skateboard turn when I push?
One of the most common causes is cracked or dried bushings. Bushings are the plastic pieces in the center of your trucks. The bend and are compressed when you steer your skateboard. Depending on the hardness of your bushings the help your trucks to turn smoothly.
Are Tensor trucks good?
The Aluminum Construction allows you a more consistent board feel when your throwing it round, with the more traditional weight being easier to pull you through your carves in the bowl. The Tensor Alloys are a quality truck at an awesome price point, perfect for your first custom set up.
