Table of Contents
Cars such as your regular four-door sedan can take from 1-2 hours to tint the windows. But vehicles such as SUVs and CUVs which have more windows can take over two hours. Even cars that don’t have a lot of windows can take longer depending on how much space is available for the installers to work with.
How long does it take to apply tints to a car?
On the average four-door sedan, it can take anywhere between one-and-a-half to two hours. On bigger cars with lots of glass surface area, steep window rake or complex window curves, the process can take up to two hours or more.
How long should I wait to roll down windows after tint?
Do I need to wait to roll my windows down? We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.
Can I roll my windows down 2 days after tint?
In case you need to park the vehicle in shade, you can use a hair dryer to ensure a warm environment around the panes. As a thumb rule, wait for four days after installing the tint before rolling your windows down.
How can I make my tint dry faster?
The drying time will depend on the weather and season. This will slow down the drying time and can make those window bubbles stick around even longer. But you can help your window tint dry faster by parking your vehicle in direct sunlight, or inside the garage if it’s snowing or raining.
How do you know when your tint is cured?
During the curing process, you might notice a haziness or cloudiness to the tint film. This is a common occurrence and is caused by water. Firstly, when the tint has been applied a squeegee can only remove so much water. Afterward, the remaining water will form pockets underneath the film.
Does tint get darker after a few days?
The tint on your window does appear to get darker over the first few days or weeks after installation, but the key word here is “appear”. In actual fact, the tint remains the same shade. It’s the adhesive that changes. From there on out, your tint will ever so slowly get lighter as a result of sun bleaching.
Is it OK to wash car after tint?
Yes, you can wash your car after getting the windows tinted. The tint is applied on the interior part of the windows, and a car wash will clean your vehicle’s exterior! However, don’t wash or clean the interior part of the window just after it’s tinted. The window cleaning process is simple.
How do you know if a tint job is good?
To tell if a car has a quality tint, see how close the film comes to the window edge, and take note of how consistent and clean the line is. A top-notch installer uses computerized templates that pre-cut the film as much as possible, resulting in a line that’s close to the edge of the window pane and doesn’t waver.
Can I turn on AC with new tints?
Once you’ve had the films applied, do keep your windows closed in the daytime so the films can do their job blocking the UV rays. Let your air conditioner, not an open window, provide cool air.
Does tint bubble at first?
It’s common to see small bubbles under freshly-installed tint. Normally, these bubbles should go away within a couple of weeks and should be very small. They may take longer to go away in cold weather and vanish faster in heat.
How long does it take for tint to cure?
Window Tint Drying Times Freshly tinted windows go through a curing process. Curing is the time the tint will take to dry. After you have your windows tinted, it’s essential to wait a minimum of three to four days before you roll down your windows.
How do you maintain car window tint?
Glass Tint USA recommends cleaning with a foam cleanser, as they do not typically streak and are usually ammonia-free. Never scrape window film with any type of blade or clean your tinted windows with anything harsh or abrasive. This will scratch the film.
How long does it take for ceramic tint to dry?
Ceramic tints may take between 4-10 weeks to dry because of their heavy coating. However, these tints are much more effective at preventing heat from entering your car than other materials. The greatest tints are ceramic, but they are also quite expensive.
Does tint lighten up after install?
We get asked all the time if a tint will lighten up after install, and the simple answer is no. You cannot lighten a tint, and if anything it will look a little darker after it dries. During manufacturing, the tint is applied in the film, and so it will not change color over time.
Does tint block heat?
Metalized window tints help reduce heat by reflecting it away from your car. By reflecting the sun’s rays, metalized window tinting can reduce glare and block harmful UV rays. Not only does a metalized window tint reduce heat, but it also strengthens the windshield.
What if it rains after I tint my windows?
Can Rain Affect A New Window Tint? And, as the tint is on the inside of your car’s windows and not the outside, and the windows are closed, the rain can’t get into your car and it won’t mess up your new tint. Tinting is, providing you do as you’re instructed, completely rainproof.
