Table of Contents
60% of the curing or maturing process of a plaster finish occurs in the first 28 days and will continue over the next 8 to 10 months. This curing process causes the alkalinity, pH, and calcium levels to rise on their own as the pool strengthens and seals the new finish.
How long does it take to plaster a small pool?
However, many pool plastering jobs can be completed within a few days to a week. On average, it takes us anywhere between 4-7 days to replaster an average sized pool.
What to do after plastering a pool?
Brush the entire pool surface, from the top of the walls down, starting at the shallow-end and ending at the deep-end. Brush thoroughly twice per day to remove all plaster dust. Brushing your pool finish at least twice a day is one of the best things you can do to maintain the gorgeous appearance of a pool finish.
What happens if it rains after you plaster a pool?
While the rain can harm the chlorination process, it can also create issues with the plastering process too. Rain will cause streaks, discoloration, and curing mistakes once the plastering has begun. Rain causes excavated pool holes, too, causing the walls to collapse downward.
Is it safe to swim in a newly plastered pool?
Do not swim in the pool until after the start-up procedure has been completed. Do not use any automatic pool cleaners for a minimum of three weeks after plastering.
How soon can you swim in a newly filled pool?
Wait about 20 minutes after adding balancing chemicals to your newly filled pool, and you should be good to swim. Calcium chloride – If you have hard water issues, it’s advised to wait about 2-4 hours before swimming after adding calcium chloride to soften your pool’s water—or until one filter cycle has been completed.
What is the cost to re plaster a pool?
The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.
Does pool plaster crack?
Pool plaster cracks due to pressure placed on the plaster surface. The shifting of the pool beneath the plaster sometimes causes cracking, especially if gaps between the pool and plaster exist. When the plaster breaks down, expect cracks to form regularly. These hairline cracks are called spider cracks.
Does pool plaster change color as curing?
One major thing to remember is that pool plaster can change colors or overall look as it sets and cures. Also, as the plaster cures, the appearance will change slightly. It is critical to maintain proper water chemistry during the curing process. If it isn’t properly maintained, a wide color variation may occur.
When can I brush my new plaster pool?
Brush the pool twice a day for the first two weeks. This opens the pores of the plaster to allow proper curing as well as removes any loose plaster dust from the surface. You may notice plaster dusting when you brush and the water becomes cloudy. This is normal and will go away with proper treatment and brushing.
How thick is plaster on a pool?
Applied at a thickness of about one half an inch, white plaster was the standard in the pool industry.
How often should you brush a new pool?
Brushing thoroughly 1-2 times per week will prevent these materials from having the time to create a stain. Brush to Prevent Algae: Every pool can grow algae, but plaster, quartz, and aggregate finishes are more susceptible.
What should I put in my pool when I first fill it up?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
Should I shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
Do I need to shock a freshly filled pool?
Add a clarifier to the water. The clarifier will help the filter to remove the very tiny particles that enter the pool in the filling process or that may remain following construction and installation. Shock treat the pool using a quality non-chlorine shock.
How often do you resurface a pool?
It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.
How do you know when your pool needs to be resurfaced?
Signs Your Pool Needs to Be Resurfaced Stains. Coarse texture. Leaking. Chalky residue. Drops in water level. Cracks.
Can you paint over pool plaster?
In addition to draining the pool, you need to degrease the surface using TSP scrub, acid etch the plaster, then wash and scrub with TSP again before you can paint. You then apply a coat of paint with long, even strokes, wait six hours, and apply another coat.
