QA

Quick Answer: How Long Should Table Runners Be

The length of your table runner is up to you. Ideally, it should hang at least six inches over each end of your table, but shouldn’t hang further than your tablecloth. For example, if your table is 60 inches long, your table runner should be at least 72 inches long, allowing for six inches at either end of the table.

Can a table runner be shorter than the table?

Table Runner Sizing. While a runner can be shorter or the same length as the table, if the runner has tassels, it should be longer than the table so the tassels hang down instead of sitting atop the table. A runner may also be placed over a tablecloth.

How long are most table runners?

The standard length for a table runner is 36 to 108 inches long. Often the length you choose will depend on the length of the table you want to use it on and how much you want it to hang off the end of the table, which can be as little as 2 inches to as much as 6 inches or even 12 inches.

How do I choose a table runner size?

A table runner should be sized approximately 1/3 the width of your dining table. If your dining table is 48 inches wide, the table runner should be approximately 16 inches wide. If your dining table is 42 inches wide, the table runner should be approximately 14 inches wide.

Should table runners go over the edge?

Typically, a table runner should hang over each side of the table where the ends fall. This is much more esthetically pleasing than a runner that stops where the table ends or is slightly shorter than the table. The amount of hang should be equal on both sides and can vary, just like the drop length of a tablecloth.

What is the point of a table runner?

Table runners provide an extra layer of protection from heat, moisture and spills while adding a “pulled together” look. Table Runners can also be placed over a coordinating tablecloth. This can add an extra layer and it may be a terrific choice when a person wants to add a specific theme to a decorated table.

How long should a table runner be for an 8 foot table?

A 4 foot table should be paired with a 60 inch table runner or an 8 foot (96 inch) table should be paired with a 108 inch table runner.

Do you put placemats on top of a table runner?

Placemats should be in the same color or texture as a table runner to harmonize the décor. Placemats should complement the table runner to make the occasion special.

How much should tablecloths hang?

For casual events, tablecloths should have a 6- to 8-inch drop from the edge of the table to the bottom of the tablecloth. For more formal events, the best choice is a tablecloth that has a 15-inch drop from the edge of the table to the bottom of the tablecloth.

What size runner for a table that seats 8?

8-Foot Table. The length of the table runner needed for an 8-foot table should be a minimum of 108″. This allows for coverage of the table and an overhang of 6″ on each side. A centerpiece runner should be one-third of the table length, which equals 32″.

How long is a table that seats 6?

For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.

How long should a table runner be for a 60 round table?

60 inch round table: 120 inch cloth (30 inch full drop) 72 inch round table: Seats 10 People: 120 inch cloth (24 inch drop) 72 inch round table: 132 inch cloth (30 inch full drop)Jan 17, 2017.

What color should my table runner be?

If the color white is too basic for you, choose a table runner in a solid color or pattern. ➔ When thinking of a table runner color, match it with your existing decor or furniture to create a cohesive look. For instance, a gray table runner would look good with a gray carpet underneath the table.

Should you leave placemats on the table?

“Plastic place mats can trap water, and some have off-gassing chemicals that might cause a chemical reaction to the finish on a new table,” he says. Fritz advises clients not to make place mats or cloths a permanent fixture.

Does anyone use tablecloths anymore?

While tablecloths were invented to protect the table from messes and spills, table runners were invented to protect the tablecloth itself. The availability of in-home washing machines and the decline in popularity of table linens in general has made runners a redundancy.

Do you need placemats on a wood table?

While you do not always need a coaster or placemat, using them can help prolong the life of your furniture. If you do not use one, if will most likely not hurt the furniture unless it is too hot or has a bottom that can scratch.

Do you use placemats with tablecloths?

Use tablecloths and placemats for a more intimate and elegant table setting. Tablecloths and placemats are normally used separately; however,there are no set rules when it comes to using them and etiquette rules do not require that these two items be used separately.

What is difference between table runner and table cloth?

You can use table runners for both formal and informal settings. Runners add color and texture to your table setting and can even provide a feeling of tradition and elegance. A table cloth can be used for so many different reasons. A long table cloth can instantly improve the look of a not so great table.

Are placemats out of style?

Placements are not out of style; it’s the design of placements that go “in” and “out” of fashion sense. It’s all about the style that you chose to give to your table. And the sense of choosing the right style, material, color, and design of the placemats can make it dowdy or trendy.