Table of Contents
The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend.
How long should a dryer vent tube be?
How Long Should A Dryer Vent Be? A dryer vent should not exceed 35 feet in length. Furthermore, for every 45 degree turn of a dryer vent you should remove 2.5 feet in total allotted length. For every 90 degree turn, you should remove 5 feet in total allotted length.
Can a dryer vent hose be too short?
How short can a dryer vent hose be? While there is a maximum allowed length for dryer vent hoses (35 feet), there is no minimum length. A dryer vent hose needs to be long enough to properly vent a dryer to the outside.
Is it bad to have a long dryer vent?
Keep exhaust duct as straight and short as possible. Exhaust systems longer than the manufacturer’s recommendations can extend drying times, affect appliance operation and may encourage lint build-up on pipe lining.
Why is my dryer vent hose so long?
A: When your clothes dryer is taking longer and longer to dry clothes, it’s often a sign of a clogged vent pipe, a clogged lint filter or a lint-clogged vent flapper. The entire 25 feet of the vent pipe from the old dryer location to the exterior vent hood was choked with lint.
How long can a flexible dryer vent be?
The maximum length of the duct is reduced by 2.5 feet for each 45 degree bend and by 5 feet for each 90 degree bend. The transition duct is not included in the exhaust duct maximum length. Vents can’t be longer than 35 feet and should be straight.
Can you run a dryer vent vertically?
You can vent a dryer vertically as long as you don’t exceed a distance of 35 feet in length. The preferred way to vent a dryer is downward or laterally but vertically is indeed an option. There are also special considerations to keep in mind when running a dryer vent vertically.
Should dryer vent be hot to touch?
The air coming out of a drying vent ranges from 125-135 degrees Fahrenheit. If the dryer is hot to the touch, this could indicate a fire hazard. There are multiple dryer types and numerous ways to deep clean your dryer. Finally, a dryer vent is supposed to be hot to the touch.
What is code for a dryer vent?
Dryer venting systems are covered in the International Residential Code (IRC) at M1502 – Clothes Dryer Exhaust.
Are dryer vents standard size?
Most dryer ducts are round and 4 inches in diameter. Some are flexible, and others are rigid. Because all types are sold for use with dryers, you would naturally assume that all are suitable for this application.
Is flexible dryer vent safe?
Foil flexible ducts are pliable and easy to install. You can find UL listed foil ducts in most hardware stores. They’re very unsafe, burn more easily than foil ducts, and are prohibited by most building codes and appliance manufacturers. Using white vinyl transition ducts will void most dryer warranties.
How do you run a dryer vent long distance?
Booster Fans. Sometimes, especially in multifamily buildings, the duct is so long that it’s just really hard to push that air all the way through, even with a perfect installation and a good wall cap. In that case, you might consider adding a booster fan. It’ll keep the air moving and cut your dryer’s run times.
Can I use PVC pipe for dryer vent?
Currently, PVC, Vinyl, or aluminum foil material is still common in plumbing applications. However, manufacturers do not permit their use for venting a dryer. PVC or Vinyl duct trap can easily melt because of the hot air coming from the dryer.
Should I cut my dryer vent hose?
By shortening the hose as much as possible, you can effectively reduce the amount of energy required to dry a load of laundry. Not only will this save you money on utilities, but it’ll also extend the lifespan of your dryer.
Why does my dryer hose keep falling off?
Most likely the dryer hose keeps falling off because it is not secured properly. Be sure the hose clamp is in the correct placement and is secured. If any damage is found with the hose clamps or the vent hose, replace them as soon as possible.
Is flexible foil duct safe?
You can use a 4-inch flexible aluminum foil duct that is UL 2158A listed and marked for safe dryer venting. UL listed and marked ducts are the better choice, as these ducts have been tested for total non combustibility with a maximum operating temperature of 435°F.
Can you reduce dryer vent to 3?
The most aesthetically pleasing option is to have a 90deg turn out of the dryer, then into a 3″ pipe that goes for 9 feet. There is another option that would have a 90 degree turn, vertical for 4 feet, another 90 degree turn and then 9 feet out through a 4″ pipe.
