Table of Contents
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
What size table seats 10 comfortably?
An 84″ rectangular dining table can seat up to 8 people comfortably. A 90″ rectangular dining table can seat up to 8 people comfortably. A 108″ rectangular dining table can seat up to 10 people comfortably. A 130″ rectangular dining table can seat up to 10 people comfortably.
How long is a 12 person table?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How big is a rectangle table that seats 12?
A 96” – 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.
How big of a table can I fit in a 10×10 room?
There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.
How many chairs fit around a 10ft table?
4. How many chairs should I fit around a table? Plan for at least 2 feet of table surface for each chair. For example, a 10-foot-long table can have five chairs across and two at each end to seat 12 people.
What size is a 10 person dining table?
Rectangular and Oval Dining People 2 No Shared area 2′ x 2’6″ (61 x 76cm) Minimum Size (with shared area) 2′ x 3′ (61 x 91cm) 6 6′ x 2’6″ (183 x 76cm) 6’6″ x 3′ (198 x 91cm) 8 8′ x 2’6″ (244 x 76cm) 8’6″ x 3′ (259 x 91cm) 10 10′ x 2’6″ (305 x 76cm) 10’6″ x 3′ (320 x 91cm) 12 12′ x 2’6″ (366 x 76cm) 10’6″ x 4′ (320 x 122cm).
How big is a 10 seat round table?
What size round table seats 10? A round table that’s 8 feet in diameter can seat 10 to 12 people.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
How long is a dining room table?
Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches.Standard Dining Table Sizes. Seats Length 4-6 68-72″ 6-8 72-80″ 8-10 80-92″ 10-12 92-110″.
How long should table runners be?
The length of your table runner is up to you. Ideally, it should hang at least six inches over each end of your table, but shouldn’t hang further than your tablecloth. For example, if your table is 60 inches long, your table runner should be at least 72 inches long, allowing for six inches at either end of the table.
How long is a table that seats 8?
A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.
How many people can a 48 square table seat?
A 48″ table can usually accommodate 5-6 people, but for larger groups, you’ll want a table that is 60″ in diameter or larger.
How do you pick the right size dining table?
Measure the length and width of your dining space. Subtract 6 feet from both the length + width of the space to allow a 3′ clearance on all sides. The result is the maximum recommended size for your dining table. For example, if you have a 12′ x 9½’ space, the maximum size for your table would be 72” x 40”.
How far from Wall should table?
We generally recommend at least 36 inches between the edge of your table and other furniture or the wall. This provides enough room for someone to walk behind the chairs while others are seated or to open a door on a nearby cabinet.
How long should a bench be for a table?
Dining bench length should be equal to the length of your dining table or slightly shorter. In order to allow enough room for your legs to rest between the bench and the tabletop, the height of the seat is important too.
How much space do you need for table seating?
The general rule of thumb is to allow 24 inches of space for every person gathered around your table. Most side chairs range between 16” wide and 24” wide, with arm chairs being as wide as 30”.
How long is a table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
How big is a rectangle table that seats 10?
Rectangle dining table size for 10. It is possible to fit 10 seats on a rectangle table size of 8–10 feet x 3’6″–4’6″ (244–305cm x 110–140cm). To seat 10, five side-by-side, you should aim for a minimum length of 10 feet and width of 2 feet 6 inches (305 x 76cm).
How many does a 96 inch table seat?
For an 8 foot, or 30 inch by 96 inch rectangular table, you can comfortably sit 8-10 people, with 4 chairs on either side and 1 chair at either end.
