Table of Contents
The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend.
Does a dryer vent need to be a certain length?
A dryer vent should not exceed 35 feet in length. Furthermore, for every 45 degree turn of a dryer vent you should remove 2.5 feet in total allotted length. For every 90 degree turn, you should remove 5 feet in total allotted length.
Can a dryer vent hose be too short?
How short can a dryer vent hose be? While there is a maximum allowed length for dryer vent hoses (35 feet), there is no minimum length. A dryer vent hose needs to be long enough to properly vent a dryer to the outside.
How long is the hose on a vented tumble dryer?
Wpro Tumble Dryer Extension Vent Hose598/3483 Wpro 3m Tumble Dryer Vent Hose, Universal fitting for use with most Air Vented Tumble Dryers. Flexible venting hose – 3.0 m in length and 102 mm diam. Universal fitting for use with air vented tumble dryers.
Can a dryer vent hose be too long?
The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the exhaust duct does not include the transition duct. This means that vents should also be as straight as possible and cannot be longer than 35 feet.
Can you run a dryer vent vertically?
You can vent a dryer vertically as long as you don’t exceed a distance of 35 feet in length. The preferred way to vent a dryer is downward or laterally but vertically is indeed an option. There are also special considerations to keep in mind when running a dryer vent vertically.
How long can a flexible dryer vent be?
The maximum length of the duct is reduced by 2.5 feet for each 45 degree bend and by 5 feet for each 90 degree bend. The transition duct is not included in the exhaust duct maximum length. Vents can’t be longer than 35 feet and should be straight.
Should dryer vent be hot to touch?
The air coming out of a drying vent ranges from 125-135 degrees Fahrenheit. If the dryer is hot to the touch, this could indicate a fire hazard. There are multiple dryer types and numerous ways to deep clean your dryer. Finally, a dryer vent is supposed to be hot to the touch.
What is code for a dryer vent?
Dryer venting systems are covered in the International Residential Code (IRC) at M1502 – Clothes Dryer Exhaust.
How high does a dryer vent need to be?
Set the vent a minimum of 12 inches above the outside ground. Pro tip: Use no more than 25 feet. of 4-inch duct, and subtract 5 feet for every 90-degree turn and 2 1/2 feet for every 45-degree turn for dryer vent installation.
Can tumble dryer hose go up?
You can direct your dryer vent upward to reach a horizontal connection or extend all the way to, and through, your roof.
What height should a tumble dryer vent be?
This usually means 150mm above ground level – otherwise rain/ground water can penetrate the property. Electrical wise there are zones which would be best practice not to be inside. If there are lights or outside sockets its best practice to stay a minimum of 300mm form these or preferably 600mm.
Is flexible dryer vent safe?
Foil flexible ducts are pliable and easy to install. You can find UL listed foil ducts in most hardware stores. They’re very unsafe, burn more easily than foil ducts, and are prohibited by most building codes and appliance manufacturers. Using white vinyl transition ducts will void most dryer warranties.
How close can a dryer vent be to a gas line?
The following are clearances from the gas regulator vent that should be followed: A building air intake system either gravity or power must be 10 feet away from a gas vent; the clothes dryer must vent at least 3 feet away from the gas vent, and an appliance exhaust and any appliance air intake should be a minimum of 3 Dec 18, 2014.
Are aluminum foil dryer vents safe?
You can use a 4-inch flexible aluminum foil duct that is UL 2158A listed and marked for safe dryer venting. UL listed and marked ducts are the better choice, as these ducts have been tested for total non combustibility with a maximum operating temperature of 435°F.
Is it OK to vent a dryer into the attic?
You’re right to be concerned. In addition to being against most building codes and a potential fire hazard, venting a dryer in an attic can result in moisture problems which could lead to rot or mold in your attic. If your laundry room has access to an outside wall, cut a hole and install a standard dryer vent.
Is it OK to vent dryer through roof?
It is not advisable to vent a dryer through the roof. This is one of the most common mistakes we see from people who are not experienced with air ducts. Dryer vent specialists will tell you that a vertical approach to installing a dryer vent is inefficient and creates a fire risk for a home if it goes unchecked.
How do I vent my dryer in the middle of the house?
The best way to vent a dryer without outside access is to run a vent hose through a window or to run a vent hose up through your attic space to a dryer vent on your roof. Alternatively, you can vent your dryer into your home and install a vent cover.
