Table of Contents
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.
What size should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
How tall is a standard valance?
Just keep in mind that valances are normally 15-25 inches (38-63cm) high and placing the valance higher may allow the top part of the window casing to show underneath the valance when the drapery panels are opened. 3. If you like a puddled drapery bottom, add 4 inches (10cm) to the total of the height measurements.
How long should a valance be for a 33 inch window?
It depends on many things, but generally speaking, the valance will need to be somewhere between 2 to 3-1/2 times the width of the window you’re trying to cover.
What size valance do I need for a 40 inch window?
Window Valance Size Chart & How-To Guide For windows measuring You will need 30 inches – 39 inches 2 Valances 40 inches – 48 inches 2 – 3 Valances 49 inches – 72 inches 3 – 4 Valances 73 inches – 96 inches 4 – 5 Valances.
What size valance do I need?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
What’s the average length of a valance?
It depends on the style of the valance, as well as how it’s installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
How do you measure a valance width?
MEASURE WIDTH For a valance that is gathered, and balloon valances, figure double the width of your window. For a flat, tailored look, the valance should be wide enough to cover the width of the rod plus the side returns of the rod.
What is the shortest valance length?
Your valance should ideally have an 18-24-inch drop. Anything less than 16 inches is too short and only works in situations where the role of the valance is to be a mere accent or when the ceiling or the window itself is too low.
How far apart should valance be from curtain?
Usually, having a 2- to 6-inch overlap is a good idea. You’d then measure the rest of the drop length above to mark where the curtain rod or other hardware needs to hang. In other words, you measure your way from the bottom to the top. This method works when there are no obstructions and the ceiling is reasonably high.
Are valances necessary?
Window valances are a must if you’d like to add dimension and weight to your window. However, it’s very popular nowadays to put a valance under a drapery as well to make a window look modern. Either way, by layering your window treatments you will have a unique look that most people don’t have in their homes.
How do I choose a window valance?
Remember the adage of Goldilocks: “not too small, not too big, just right!” But don’t worry, it’s not intimidating. Just know the height of your valance should be 1/6th the overall height of your whole window treatment, whether it be drapery, cellular shades, or a bare window.
How many waterfall valances do I need?
When you’re measuring a window for multiple waterfall valances, each valance layer should measure double or triple the width of the window dimensions to create a full, luxurious, stacked appearance. For example, if your window is 54 inches wide, select valance widths ranging from 108 inches to 162 inches.
How do you measure fabric for a valance?
Measure Twice, Cut Once A retractable metal tape measure offers the best tool for calculating the amount of fabric needed to go across a window valance. Measure from one end of the rod to the other, whether the rod is mounted inside or outside of the frame.
How do you measure a rod pocket valance?
How to Measure: Rod Pocket Curtains MEASURE LENGTH. Measure from the top of the curtain rod down to where you want the curtain to fall. MEASURE WIDTH. The curtain should measure double the width of the window for fullness. STYLING TIP. The length of your curtain is a matter of personal preference.
What size are valance curtains?
If you’re shopping for ready-made valances, the most common standard size you’ll likely come across is a 50-inch wide valance. If you’re hiring a custom workroom, you can specify any size.
Do you need a double curtain rod for a valance?
We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).
How many inches should a valance be?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.
Does a valance go over the mattress?
A valance is a decorative sheet that hides the base of your bed, a bit like a skirt. A Sheet Valance covers the mattress and the bottom of the bed and is fitted over the mattress, acting as the fitted sheet as well as the Valance.
