Table of Contents
Allow at least 24 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. When completely dry, perform the splash test to determine if second coat is necessary. Allow 45 days drying time before applying latex paint over Thompson’s® WaterSeal® Clear Multi-Surface Waterproofer.
How long after applying Thompson Water Seal can you walk on it?
How long before you can walk on Thompson Water Seal? Surfaces coated with Thompson’s water seal should be dry in about 24 hours. That is all the time you need to wait before you can walk on the sealed surface if you followed the application instructions correctly.
How long does Thompson Water Seal need to dry before rain?
Coverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions.
How many coats of Thompson Water Seal do I need?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
Can you put 2 coats of Thompson’s water Seal?
Thompson’s WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.
How long does Thompson’s Water Seal last in the can?
How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years.
Can you apply Thompson’s Water Seal with a rag?
Use a dry microfiber cloth or rag to clean the surface. Keep in mind that using a damp microfiber cloth to clean the surface of an unfinished wood could warp. Add a drop of water on the surface to determine whether your wood is finished or unfinished. If it absorbs and leaves a mark, then it’s unfinished.
What happens if it rains on a freshly oiled deck?
Stains and oils penetrate wood best when it’s cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.
What happens if it rains after sealing a deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
How soon can it rain after applying Ready Seal?
Ready Seal is rain safe in about 45 minutes, meaning once the stain is applied rain or moisture will not affect the finished product after 45 minutes of application.
Can you use a sprayer with Thompson’s Water seal?
Can you spray thompson’s water seal? Yes, you can apply your Thompson’s water seal using a standard pump garden sprayer and achieve the desired results. This sprayer is best to use when applying sealers.
Should I use Thompson Water seal on pressure treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
What is the best way to apply Thompson’s Water seal to a deck?
The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
How much does Thompson’s Water seal coverage per gallon?
That determines how many gallons of stain are required (each gallon covers up to 400 square feet). You can buy it and be on your way. Thanks to its pigment-suspension technology, there’s no need to wait for the Waterpoofing Stain to have its turn in the paint shaker.
How Much Thompson Water seal do I need for my fence?
Divide the total square feet of fence to be stained by the coverage listed on the can. For example, if you have 1,000 square feet of fence and the stain says that 1 gallon covers 200 square feet, you would divide 1,000 by 200, which equals 5 gallons to cover the fence.
How often should I water seal my fence?
While you should always follow the manufacturer’s recommendations, the general rule is that wood fences should be stained every five years and sealers should be applied every two to three.
Does Thompson’s water seal get old?
Asphalt sealer and crack filler, if stored above freezing, will be good for a year (opened or unopened). PVC primer and Thompson’s Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.
Is Thompson water seal oil based or water based?
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.
How do you remove Thompson water seal from wood?
So here is the only recipe that worked for me Remove the product with a real wood striper, i used “Super remover” this product can dissolve about anything, wear gloves and glasses. Use a green abrasive pad with “Super remover” and scrub the surface. Sand the surface.
What temperature do you apply Thompson’s water Seal?
Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.
