Table of Contents
Typically, you can apply some weight to the posts after 4 hours, but it’s a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.
How long does concrete take to set posts?
Allow the concrete to harden for at least 24 hours before removing the bracing supports. Wait for 3 days before affixing anything to the post.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Is it OK if it rains after pouring concrete?
If the rain begins 2 to 4 hours after pouring the concrete, the surface will not be damaged. Similarly, if it rains soon after the finishing stage, rainwater will not cause much damage if it does not seep into the surface. Light sprinkles of rain can cause no damage to freshly prepared concrete structures.
Should you wet concrete while curing?
ANSWER: Keeping concrete moist helps the curing process. If too much water is lost from the concrete through evaporation, the hardening process slows down or ceases. Concrete continues to gain strength after pouring for as long as it retains moisture, but the longer it moist-cures, the slower the rate of strength gain.
How tall should a fence be for a 6-foot fence?
As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.
How many bags of Postcrete do you need per post?
“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed.
How many bags of concrete does it take to fill a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How long should concrete cure before putting weight on it?
Curing time of concrete is typically 24-48 hours, at which point it’s safe for normal foot traffic. After one week, concrete is typically cured enough to handle continued construction including heavy machinery.
When should I start watering my concrete?
To put it simply, the goal is to keep the concrete saturated during the first 28 days. The first 7 days after installation you should spray the slab with water 5-10 times per day, or as often as possible. Once the concrete is poured the curing process begins immediately.
How soon should I water concrete after pouring?
One of the most common methods for curing concrete is to hose it down frequently with water—five to 10 times per day, or as often as you can—for the first seven days. Known as “moist curing,” this allows the moisture in the concrete to evaporate slowly.
How long does 4 inches of concrete take to cure?
Your concrete should be solid enough to walk on, without leaving footprints, after anything from 24 to 48 hours. By seven days, your concrete should be cured to at least 70 percent of its full strength.
Can you leave concrete forms on too long?
The forms or “molding” that holds the concrete in place until it dries should be left alone for at least two days to ensure that the concrete is completely dry. If the forms are removed too soon, the concrete can begin to sag, crack and collapse, especially if conditions like temperature affected its strength.
How strong is concrete after 3 days?
Thus, it is clear that concrete gains its strength rapidly in the initial days after casting, i.e. 90% in only 14 days.Why do we test concrete compressive strength after 28 days? Age Strength per cent 1 day 16% 3 days 40% 7 days 65% 14 days 90%.
How far apart should fence post be?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Should a fence follow the ground?
As you install the fence, let the pickets follow the slope of the land. This option is ideal for pet owners because the base of the fence sits flush with the turf; your furry friends can’t crawl underneath when you’re not looking.
How big of a hole do I need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
What is the difference between Postcrete and concrete?
Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.
Can you use expanding foam for fence posts?
Expanding foam fence post mix is a two-part polymer. It is usually provided in an aerosol can or will be pumped using dedicated equipment in commercial applications. Expanding foam for fence post fixing is a two-part polyurethane resin supplied in a lightweight pack. The two components react when mixed.
