Table of Contents
While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.
What happens if you stain your deck and it rains?
Splotchy Appearance If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
How long after staining deck can it get wet?
Applying Stain Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it’s time to make your deck amazing.
What if it rains 3 hours after I stain my deck?
If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you’ve stained the wood, the stain will peel and flake off.
Can it rain the day after you stain a deck?
It Rained Shortly After Staining my Deck It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast. You cannot do much until it stops raining once it starts.
How long does deck stain need to dry before walking on it?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
How many dry days do you need to stain a deck?
You will want to set aside a minimum of two days, including drying time. If your deck needs to be power washed, or if the boards on the deck need replacing, you may want to set aside another extra couple of days. Be sure to have all of your supplies ready well ahead of time.
How many coats of stain do you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
What temperature should it be to stain a deck?
Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.
Can I apply a second coat of deck stain a week later?
Can I Apply a Second Coat of Stain a Week Later? No, applying a second coat of stain a week later is a bad idea. If you apply another coat of wood stain after a week, it will not adhere to the wood properly.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
When can I put furniture back after staining deck?
I would wait at least 24-48 hours before moving patio furniture back on the deck and returning it to active use.
How long does it take to stain deck?
Wondering when to stain a new deck? After construction, the wood needs time to dry out and weather. Typically, you should wait between six and 12 months to stain your new deck.
How long does it take for wood stain to cure?
If you use a high-quality exterior wood stain like Olympic Elite stains, it can take a full 24-48 hours to cure, depending on the moisture level within your deck as well as the quality and condition of the wood your deck is made from.
How long does Sherwin Williams deck stain take to dry?
Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.
Can you apply deck stain with a roller?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. PRO TIP: Back brushing your stain will help the stain soak into your deck boards, allowing better, long-lasting results.
What happens if you apply second coat of stain too soon?
If you apply a second, unnecessary coat of stain to wood that is already adequately covered, you risk creating a tacky surface that is prone to early peeling because the second coat is not penetrating the wood surface, but simply laying on top of the first coat of stain.
Should I stain wood twice?
Keep good records so you can duplicate what you have done if you need to. Leave the stain on the wood longer before wiping it off. Apply a second coat of stain after the first has dried fully. This will usually produce a darker coloring, but it adds a step to the process and slows production.
How long do you wait to apply a second coat of stain?
For a deeper color and sheen, wait one hour and apply a second coat. After 1 hour, the surface is dry to the touch. Wait overnight before subjecting the wood to normal use. Optional, for additional luster or sheen a clear protective finish can be applied.
