Table of Contents
Allow at least 24 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. When completely dry, perform the splash test to determine if second coat is necessary. Allow 45 days drying time before applying latex paint over Thompson’s® WaterSeal® Clear Multi-Surface Waterproofer.
How long does Thompson’s water Seal need to dry before rain?
Coverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions.
How long after applying Thompson Water Seal can you walk on it?
How long before you can walk on Thompson Water Seal? Surfaces coated with Thompson’s water seal should be dry in about 24 hours. That is all the time you need to wait before you can walk on the sealed surface if you followed the application instructions correctly.
How many coats of Thompson Water Seal do I need?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
Do you need two coats of Thompson’s water Seal?
Deck Sealing and Staining Tips Thompson’s WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.
What happens if it rains after sealing a deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
How long does Thompson’s water seal last in the can?
How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years.
Can you apply Thompson’s Water Seal with a rag?
Use a dry microfiber cloth or rag to clean the surface. Keep in mind that using a damp microfiber cloth to clean the surface of an unfinished wood could warp. Add a drop of water on the surface to determine whether your wood is finished or unfinished. If it absorbs and leaves a mark, then it’s unfinished.
What temperature do you apply Thompson’s Water Seal?
Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.
How do you remove Thompson’s Water Seal from wood?
So here is the only recipe that worked for me Remove the product with a real wood striper, i used “Super remover” this product can dissolve about anything, wear gloves and glasses. Use a green abrasive pad with “Super remover” and scrub the surface. Sand the surface.
Should I use Thompson Water seal on pressure treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
Can you use a sprayer with Thompson’s Water seal?
Can you spray thompson’s water seal? Yes, you can apply your Thompson’s water seal using a standard pump garden sprayer and achieve the desired results. This sprayer is best to use when applying sealers.
How Much Thompson Water seal do I need for my fence?
Divide the total square feet of fence to be stained by the coverage listed on the can. For example, if you have 1,000 square feet of fence and the stain says that 1 gallon covers 200 square feet, you would divide 1,000 by 200, which equals 5 gallons to cover the fence.
How much does Thompson’s Water seal coverage per gallon?
That determines how many gallons of stain are required (each gallon covers up to 400 square feet). You can buy it and be on your way. Thanks to its pigment-suspension technology, there’s no need to wait for the Waterpoofing Stain to have its turn in the paint shaker.
Can Thompson’s Water seal be used on stained wood?
Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. If the stain has completely dried and cured it’s fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.
How long after rain can you seal a deck?
Always allow the surface to dry for at least 24 hours after a rainfall before sealing a deck.
How long does deck sealer need to dry before rain?
While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.
Can I apply a second coat of deck stain a week later?
Can I Apply a Second Coat of Stain a Week Later? No, applying a second coat of stain a week later is a bad idea. If you apply another coat of wood stain after a week, it will not adhere to the wood properly.
Does Thompson’s water seal get old?
Asphalt sealer and crack filler, if stored above freezing, will be good for a year (opened or unopened). PVC primer and Thompson’s Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.
Is Thompson’s water seal oil based or water based?
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.
How cold is too cold to seal a deck?
Don’t seal a deck below 50 degrees. A 65 degree day might easily become a 40 degree night, and your seal will be ruined. The warmth helps it to dry out faster and seal more effectively.
