Table of Contents
How long does it take to sand a floor? It can take 1-5 days for a professional and 2-15 days for a DIY enthusiast, depending on the size and condition of the floor. For planning purposes, it would take 1-day per room for a professional and 2 days per room for a homeowner doing DIY.
How long does it take to sand and refinish hardwood floors?
It typically takes between two and five days to refinish hardwood floors, depending on the type of polyurethane you use (oil or water-based), and the size and condition of your floors.
How long does it take to sand a floor with a floor sander?
So how long does it take to sand a floor? If you’re using both the electric sander and the edger in 140 square-foot floor space, it will take you roughly 5 hours to do three sanding passes. Another thing you must take into account is how old your house is.
How long does it take to sand and polish timber floors?
Every floor sanding and polishing job is different, so the time frame will depend on the size and complexity of the job. However, generally most floor polishing and sanding jobs will take between three to four days to complete.
Can you stay in your house while floors are refinished?
The strong scent of polyurethane and stain lingers in the atmosphere for very long and can kick-start a migraine any time or all the time. Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air.
Can you walk on sanded floors?
Drying time after the floors are refinished: After you’ve refinished your hardwood floors, you need to wait before walking on them and/or moving (or returning furniture). At a minimum, you should wait at least 24 hrs before walking on the floors; for hours 24-48, it’s best to wear socks only (no shoes, no bare feet).
How long before you can put furniture on refinished hardwood floors?
Wait 48 to 72 hours after the hardwood has been refinished/ finished before “PLACING” furniture back in its place. Keep a steady temperature and humidity within your home. Dramatic swings in temperature will cause hardwood to shrink or to cup. Sweep/dust and mop often.
Can I sand my hardwood floors with a hand sander?
The palm sander is definitely the most common tool for sanding a wooden floor by hand. Use it with a coarser sandpaper grit for a lot of efficiency and quick results. Palm sanders also have a square edge, which means you can sand right into the corners of the floor.
Are my floorboards suitable for sanding?
If your floorboards are ‘just’ dirty or have a thin coat of paint on them, starting to sand with 24 grit sandpaper should be sufficient. If your floorboards are really uneven or painted in a thick coat of paint, you will probably be best starting to sand your floors with 16 grit paper.
How much does it cost to re sand hardwood floors?
On average, sanding hardwood floors can cost between $. 50 to $3 per square foot. Sanding is done with large drum sanders for most of the area and belt sanders around the perimeter. Sanding usually takes several passes to make sure the hardwood flooring is smooth and blemish-free.
When can dogs walk on refinished hardwood floors?
Dogs should stay off refinished hardwood floors for at least 24 hours. This will be the amount of time that an oil-based polyurethane coat needs to dry all the way.
Should hardwood floors feel rough after refinishing?
What Causes Newly Finished Hardwood Floor to Feel Rough? If a hardwood floor that you sanded and refinished with water-based polyurethane feels rough, the reason is likely one of the following: You didn’t use enough coats of polyurethane. You didn’t clean the floor well enough and there’s dust in the finish.
Can I sand my floors myself?
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
How much wood is removed when sanding hardwood floors?
When sanding any floor, the amount of wood you remove depends on the coarseness of the paper you use. Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper.
Is it hard to sand hardwood floors?
Sanding hardwood floors might seem like a pros-only project. And then there’s that big, scary sanding machine… But it’s really not that difficult. I’ve helped hundreds of homeowners—some of them complete DIY novices—successfully prep their floors for a new finish.
Can I sleep in my house after refinishing hardwood floors?
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project Jul 20, 2018.
Should you paint before sanding floors?
Painting Walls Before Refinishing or Laying Floors For subfloors (prior to floor covering), almost any kind of paint drips are fine as they will be covered over. Painting activity and tools that damage flooring can be sanded out.
Do you paint first or refinish floors first?
Assuming that you are getting the work done professionally, it is usually better to do most of the painting AFTER the flooring and most of the prep work BEFORE the flooring. The ideal is to first do any prep work to the walls – e.g.ripping up wall paper, sanding and patching walls, etc.
