Table of Contents
Traditional pool resurfacing takes, on average, about two days from start to finish, as well as any potential additional time needed for refilling the pool itself. But on average, the whole process takes roughly two days.
What is the process of resurfacing a pool?
There are five main steps in resurfacing a swimming pool: draining the pool, prepping the pool (which would include repairs and tile work, if any), bond kote, applying the interior finish, and filling the pool.
How long does Replastering a pool take?
The process is a lot like icing a cake. They use a long trowel stroke to smooth out the finish. The entire plastering job takes 2-4 hours. It must be done fast, because we want to get the fresh plaster underwater within the shortest amount of time.
How long should a pool resurface last?
To determine how often your pool needs to be resurfaced will depend upon when it was installed and with what material it was made. Cement and plaster, for example, usually require resurfacing every three to seven years. Whereas more durable material can last as long as fifteen years before such a job is required.
How much does it cost to re surface a pool?
All in all, the average cost of resurfacing a pool in the U.S. is $7,000 per 1,000 square feet. Depending on where you live and what kind of pool you have, you can expect to pay anywhere between $1,500 and $100,000 for a quality resurfacing job.
How do you prepare a pool for resurfacing?
Step 1 – Drain. The first step of the swimming pool resurfacing process is draining the pool. Step 2 – Prep. Step 4 – Plumbing and Seal. Step 5 – Pool Finish Material Installation. Step 6 – Acid Wash (optional depending on finish material) Step 8 – Initial Water Treatment/Surface Curing.
How often should you resurface a pool?
It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.
How many times can you Replaster a pool?
On Average, Replastering is Every 10 Years So how often do you need to replaster a pool? The short answer is about every 10 years. However, it’s important to consider the factors mentioned above, as they are typical signs that your pool needs to be replastered.
What is the average cost of replastering a pool?
The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.
Is resurfacing a pool the same as Replastering?
So, when a client requests a new pool surface, the pool remodeling industry refers to that as pool resurfacing or replastering. Since the project focuses on the interior surface — the walls and floor of the pool — price can vary.
What happens if you don’t resurface your pool?
If you don’t resurface the pool, which is necessary because it is always exposed to weather, cracks and an unevenness in the pool surface will occur and this could lead to algae stains, water leaking and injuries from the uneven surface.
What happens if you don’t Replaster a pool?
Over a period of them, there are certain minerals in the water like iron and copper that may stain the plaster and ruin the look of your pool. Whenever this happens, it means that its time to replace it. Also, you could get scratched or your swimsuit could get torn with the jagged plaster.
How do I know if I need to resurface my pool?
Top 10 Signs You Have To Refinish Your Pool Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. Surface Stains. Roughness. Check Cracks. Plaster Discolorations. Structural Cracks. Rust Stains. Loss of Pebbles.
How much does it cost to resurface a fiberglass pool?
How much does it cost to resurface a fiberglass pool? If you’re using a product like ecoFINISH to resurface your swimming pool, you can expect to pay about as much as you would to refinish your pool with plaster. To give you a rough estimate, you can replaster a small 12×24 inground pool for about $10,000 and up.
Can you gelcoat a concrete pool?
Surface Differences Concrete pools with fiberglass layers use a gelcoat that is applied and cured in an outdoor environment. The gelcoat surface on a traditional fiberglass pool lasts much longer because it is applied in a factory with optimal curing conditions.
How often should you resurface a gunite pool?
On average, gunite swimming pools last 7 to 10 years before they need to be resurfaced. When that time comes, it’s important to know what options are available so that you can pick the best choice for your backyard space.
Can you resurface a pool?
If you want to resurface a concrete pool, your most economical choice is plaster. Certain products, such as Sider-Proof, actually make resurfacing in plaster easy enough for a do-it-yourselfer to tackle. An experienced professional will either chip or sandblast the old plaster out, leaving the original concrete shell.
What is the longest lasting pool finish?
Tile Finishes Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, it’s the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.
How long does Marcite last?
Marcite is also the most affordable option for a new pool or replastering an existing one. With properly maintained pool water, it will last 8 to 12 years.
How long does Gunite last in a pool?
A poorly built Gunite pool certainly has the potential to crack. But a properly built Gunite pool can and should last for 100 years or more, with no risk of cracking whatsoever.
