Table of Contents
Working alone, you can clad the soffits and fascias on a 1,200-sq. -ft. house in about five days. Get a volunteer to cut and hand you up materials and you’ll really move along.
How long does it take to do soffits and fascias?
The majority of jobs can be completed in half a day, in general, if you are having fascia and soffit boards replaced you’re looking at around 1-2 days worth of work. If your property has a lot of curved edges, or if it’s an unusually large home, then the installation process might take longer.
What goes on first fascia or soffit?
Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.
Do you install soffit before fascia?
The installation of soffit will determine the positioning of the inside and outside corner posts. It also is necessary to complete the soffit before the final course of siding is installed on the wall. Vinyl soffit is designed to be easily installed lengthwise from wall to fascia.
How much does soffit and fascia cost per foot?
Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.
How long does it take to replace fascia?
How Long It Would Take to Replace. A skilled professional can do 8-10 feet of fascia board in 20-30 minutes. An untrained person could take 3-4 hours to replace 8-10 feet. After being replaced it would need to be caulked and painted or the vinyl siding would need to go back up.
Do you need scaffolding to replace soffits?
In some instances, scaffolding will be recommended – such as for a typical 3 bedroom semi-detached house on two floors, replacing soffits and fascia board will require the erection of scaffolding.
How are Bargeboards attached?
While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted ‘V’ under the edges of the roof verge, protecting the exposed materials much like a fascia.
How is fascia attached?
The fascia board is nailed to the rafter feet and usually has a rebate or lip for the soffit boards to slot into. They are then either fixed to a batten that is attached to the brickwork, or sat on top of the last course of brickwork.
Should fascia be installed before shingles?
If your roofers are replacing your fascia board as part of a full roof replacement, then they will install the new shingles before they address the fascia. There is no way to replace the fascia board without removing the gutters, as the gutters are mounted to the board.
How long are soffit panels?
Soffit panels are available in 12-ft. lengths, 12- or 16-in. widths and vented or unvented.
Do you nail soffit tight?
Be sure to leave space for the full expansion allowance in the receiving channel. If you’re using a nailing strip (as in figure 4), do not nail tightly—allow movement for expansion. Continue installing the panels by locking and nailing the soffit in place.
How much do you charge to install soffit and fascia?
The labor costs for soffit and fascia installation can vary from contractor to contractor. Fascia installation costs range from $6 to $20 per linear foot, while soffit installation tends to be cheaper than fascia at $1 to $3 per linear foot.
What is the labor cost to install soffit and fascia?
The labor cost to install fascia is between $6 and $20 per linear foot. The average one-story home will need 300 linear feet of soffits, which would require between 11 and 13 active labor hours costing $800 to $1,400 total. The labor cost to install soffits is between $1.50 and $3 per foot.
How much does vinyl soffit cost?
The national average materials cost to install a vinyl soffit is $1.56 per linear foot, with a range between $1.24 to $1.88. The total price for labor and materials per linear foot is $6.46, coming in between $4.82 to $8.11. A typical 25 linear foot project costs $161.62, with a range of $120.46 to $202.77.7 days ago.
Do gutters cause fascia to rot?
The most common reason why fascia boards rot is due to an ineffective gutter. A gutter system that’s old and leaky or has an improperly aligned downspout will cause the excess moisture to back up into the fascia, which will result in rot over time.
How long do wooden soffits last?
Well installed and maintained wooden fascia can last for up to 20 or 30 years, before they start deteriorating. Although some might need replacing within 5 to 10 years.
What causes soffits to rot?
Soffits are that narrow strip of ceiling material that covers the underside of the roof eaves. Unfortunately, rotted soffit is usually caused by leaks that drip down and collect in the gutters and on the soffit boards. It can also be caused by bad weather and pesky animals.
