Table of Contents
When used according to the manufacturer’s recommendations, Bondo takes 10 to 15 minutes to dry enough to form a sandable surface. After 45 minutes it’s cured enough to be painted.
How long should Bondo cure before sanding?
Allow the putty to dry 15 minutes at 77 degrees F (25 degrees C). In cooler climates, putty may take 20-30 minutes to dry. 7. Using 3M™ Sandpaper 80 grit, sand and shape the filled area to the contour of the surface.
How long before I can paint Bondo?
Bondo mixed to the color swatch will begin to cure in less than 10 minutes at room temperature. Too much hardener in a warm environment will reduce working time, but too little in a cool environment can result in maddeningly long curing times.
Can Bondo get wet after it dries?
the moisture will be trapped between the metal and the bondo. something about it yes the bondo will dry out but it traps just enough between the two to cause problems most likely way down the road. there is something about it that makes it harder for the moisure to escape than it was for it to get in.
How long does Bondo take to drive?
You only want to mix what you can use in about 10 minutes. Properly mixed, body filler will begin to thicken in 10-15 minutes, and be fully cured in 30.
How long can Bondo be left unpainted?
Between life and work, the longest time period the bondo would go Unpainted would be about 2-3 weeks.
Is Bondo waterproof?
Bondo Fiberglass Resins and Repair Kits are 100 percent waterproof. Because they do not shrink, they are excellent sealers. Bondo Fiberglass Resin is sandable in less than 2 hours, is compatible with all paints, and creates a strong and long-lasting bond.
Do you have to prime over Bondo?
Do You Need To Prime Bondo Before Painting? To help your top coats adhere to the metal, you should use a “direct to metal” primer (DTM), but it is not usually necessary under body filler. Once the metal is primed, you can apply a “filler primer” (2K) to hide scratches and minor surface scratches.
What grit sandpaper do I use for Bondo?
Make sure to sand outside of the repair area as Bondo will need to be spread and applied wider than the damaged area. (36-grit to 220-grit should do the trick for body filler application). AutoBodyNow.com sells a vast assortment of sandpapers and sanders to complete this step.
Does cold weather cure Bondo?
If you’re talking about body filler (bondo) you can use localized heat so that it cures properly. A small heater or heat lamp can keep you going all Winter as long as you’re doing one or two panels at a time.
Is it okay to wet sand Bondo?
Don’t wet sand filler. Filler is too absorbant and you can have problems getting it dry plus you could cause moisture to wick through to the metal or weaken the bond between the filler and the substrate.
Can you wet sand over Bondo?
Cut and sand Once the Bondo cures, it’s time to sand. Power sanders are OK to break the surface and knock down any high spots, but hand sanding with the body contour is the best way forward. Make long sweeps for sanding over the repair.
Can Bondo be exposed?
Applying Body Filler / Bondo The application of filler material can expose you to some hazardous materials if you do not take appropriate precautions. Most body fillers contain a solvent called styrene. Exposure to styrene can cause respiratory irritation.
How hard does Bondo cure?
When used according to the manufacturer’s recommendations, Bondo takes 10 to 15 minutes to dry enough to form a sandable surface. After 45 minutes it’s cured enough to be painted.
Is Bondo strong?
Bondo Metal Reinforced Filler is easy to use, yet exceptionally strong for repairing and rebuilding metal, fiberglass and more.
How much hardener do you put in Bondo?
Mixing is the most vital step when using body filler. Plastic body filler needs the filler and a hardener mixed at the perfect ratio. The mix is crucial: 50:1.
Can you fix rotted wood with Bondo?
Once the surface is solid, hard wood and clean, you can apply the filler. Mix just the amount you can use in about 5 minutes. When using Bondo to repair wood rot, always wear gloves and work in a well-ventilated area.
Can you add color to Bondo?
Bondo is polyester and it can be tinted. There are color dispersions specifically made to tint it. If you are going to use Bondo or any other polyester filler (a product that uses benzoyl peroxide as the hardener), one way to color the material is to add fresco colors.
Can you Bondo fiberglass?
Fiberglass Bondo is waterproof, extremely strong and can be used for virtually any fiberglass panel. As an initial matter, it must be recognized that there is Bondo for metal and Bondo for fiberglass. Ensure that the Bondo for fiberglass is used.
Is Bondo good for wood?
Bondo® Wood Filler is stainable and paintable and turns to a medium brown color when mixed, making it perfect for almost any wood surface. The two-part wood filler forms a permanent bond and will not shrink.
Can you put body filler on Baremetal?
For small repairs, you can bog directly over the bare metal. If the repair is larger, or you’re looking for a longer-lasting job, apply a base coat of epoxy primer before laying on the filler.
Should you prime before body filler?
Do not proceed to Primer Filler stage until filled area is even. Adding body filler AFTER primer filler should be avoided to prevent possible adhesion, staining and shrinkage concerns.
