Table of Contents
While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.
What happens if you stain a deck and it rains?
Splotchy Appearance If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
How long should deck stain sit before rain?
Applying Stain Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it’s time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.
What if it rains 3 hours after I stain my deck?
If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you’ve stained the wood, the stain will peel and flake off.
Can I stain my deck if it going to rain?
It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast. You cannot do much until it stops raining once it starts.
How long does it take a deck to dry after staining?
With the temperature above 60 degrees, an oil-based deck stain typically dries in 4-24 hours. Most can take rain within 12 hours though as water will not “wash” out the oil stain from the wood. Wait 24-72 hours for full cure before walking on the deck and replacing furniture.
How long does stain take to dry outside?
In most locations, humidity levels are higher in the early morning and evening. Other areas may have temperature fluctuations of 20 degrees or more, making the stain take longer to dry. In general, interior stains require an average of between 6 and 24 hours to dry, while exterior stains take between 24 and 72 hours.
How many coats of stain do you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. The direct sunlight can cause the deck to dry too quickly which will leave water marks.
How long after staining a deck can you walk on it?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
Can I apply a second coat of deck stain a week later?
Can I Apply a Second Coat of Stain a Week Later? No, applying a second coat of stain a week later is a bad idea. If you apply another coat of wood stain after a week, it will not adhere to the wood properly.
What temperature should it be to stain a deck?
For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces. All finishes, including stains and paint, have trouble drying in moist conditions.
How long does stain last on deck?
The best stains should last three to five years on a deck, and even longer if applied to siding or fences, which don’t get as much abuse. “The sun and water beat down on a deck, snow can pile up, and even dirt and mildew spores can settle on the flat surface,” says Rico de Paz, Consumer Reports’ wood stain tester.
How long does it take for wood stain to cure?
If you use a high-quality exterior wood stain like Olympic Elite stains, it can take a full 24-48 hours to cure, depending on the moisture level within your deck as well as the quality and condition of the wood your deck is made from.
How long does Sherwin Williams deck stain take to dry?
Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
Does stain dry in 40 degree weather?
“Staining wood usually works between 50 and 90 degrees Fahrenheit,” says Phillip Ash, the founder of Pro Paint Corner, “but the best temperature would be at around 70 degrees Fahrenheit.” Some brands or types of stains may work outside that range, but it’s the generally accepted best temperature for staining wood.
How do you speed up the drying time of stain?
How to Make Stain Dry Faster (10 ways) Add a Compatible Drying Agent to the Wood Stains. Use a Space Heater. Turn Up the Thermostat. Use a Dehumidifier. Use Your Indoor Air Conditioners to Decrease the Indoor Humidity Level. Use Portable Fans or Your Overhead Fan to Increase the Airflow. Open the Windows to Increase Airflow.
How long does it take Behr deck stain to dry?
Wait 24-48 hours before light foot traffic. 72 hours for full cure. Additional dry time may be needed in cooler temperatures and higher humidity.
