Table of Contents
(If you need to use shaping tools, this is the time to do it- while the putty is beginning to harden but isn’t yet dry.) Let dry completely (20-30 minutes).
How long does body filler take to harden?
When used according to the manufacturer’s recommendations, Bondo takes 10 to 15 minutes to dry enough to form a sandable surface. After 45 minutes it’s cured enough to be painted.
How long does car body filler take to set?
Mix the bodyfiller with the correct hardener according to the makers instructions, making sure it is well mixed and totally streak-free, preferably within 2-3mins to allow working time on the panel before it begins to set.
How long should Bondo cure before sanding?
Allow the putty to dry 15 minutes at 77 degrees F (25 degrees C). In cooler climates, putty may take 20-30 minutes to dry. 7. Using 3M™ Sandpaper 80 grit, sand and shape the filled area to the contour of the surface.
Will fillers set without hardener?
Does Wood Filler Harden Without Hardener? No, the wood filler does not harden without adding a hardener. The hardening process happens due to a chemical reaction between the wood filler and the hardener which is also known as the catalyst.
How long can Bondo be left unpainted?
Between life and work, the longest time period the bondo would go Unpainted would be about 2-3 weeks.
Does cold weather cure Bondo?
If you’re talking about body filler (bondo) you can use localized heat so that it cures properly. A small heater or heat lamp can keep you going all Winter as long as you’re doing one or two panels at a time.
Can body filler be wet sanded?
Don’t wet sand filler. Filler is too absorbant and you can have problems getting it dry plus you could cause moisture to wick through to the metal or weaken the bond between the filler and the substrate.
Are body fillers strong?
We often get asked about metal body fillers or reinforced fillers and what they are. These fillers are incredibly strong but do have their place in the body shop. Not Just for Autobody Work- Metal Body Filler is a great alternative to other repairs other than auto body use.
How thick can you apply body filler?
There is no minimum thickness for Bondo, but there is absolutely a maximum. You do not want to apply body filler to anything that is thicker than about a 1/4”. That does not mean it can’t be done, but the repair will not last as long. Eventually the filler will shrink and possibly crack, or even pop off!Feb 2, 2020.
How long for Bondo smell to go away?
Horrible Odor The odor does go away in about one to two hours after drying. The smell is probably the biggest negative about this product when used indoors.
Is Bondo waterproof?
Bondo Fiberglass Resins and Repair Kits are 100 percent waterproof. Because they do not shrink, they are excellent sealers. Bondo Fiberglass Resin is sandable in less than 2 hours, is compatible with all paints, and creates a strong and long-lasting bond.
What grit sandpaper do I use for Bondo?
Make sure to sand outside of the repair area as Bondo will need to be spread and applied wider than the damaged area. (36-grit to 220-grit should do the trick for body filler application). AutoBodyNow.com sells a vast assortment of sandpapers and sanders to complete this step.
Why is my wood filler cracking?
The extra water will evaporate, without the volume the wood filler can’t stretch across and it will crack. Basically wood filler will always crack unless the gap is tiny or you can keep the room still with the same humidity and temperature.
Do you have to add hardener to bondo?
(Bondo comes with a tube of hardener.) If you add too much hardener, the mixture will gel too quickly. If you add too little, it increases the amount of time for it to cure, and if you don’t add enough it will never cure.
Should I prime before body filler?
Do not proceed to Primer Filler stage until filled area is even. Adding body filler AFTER primer filler should be avoided to prevent possible adhesion, staining and shrinkage concerns.
Can Bondo be exposed?
Applying Body Filler / Bondo The application of filler material can expose you to some hazardous materials if you do not take appropriate precautions. Most body fillers contain a solvent called styrene. Exposure to styrene can cause respiratory irritation.
Can you apply body filler over paint?
It is normal for filler and puttie to work OK over OEM paint that has been properly sanded (80-180 grit). The aftermarket paint market is filled with a variety of different types (lacquer, enamel, urethane, water-based). Paint should be removed from the area where filler will be applied before it is applied.
Can I use a heat gun on bondo?
When stripping down old panels for restoration, it’s not uncommon to discover bondo hidden beneath that shiny coat of paint. Sanding old filler can send a plume of dust throughout the shop, but using a heat gun instead can make short work of removing old filler without all the dust. Jul 20, 2018.
