Table of Contents
The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend.
Is it bad to have a long dryer vent?
Keep exhaust duct as straight and short as possible. Exhaust systems longer than the manufacturer’s recommendations can extend drying times, affect appliance operation and may encourage lint build-up on pipe lining.
How long should a dryer vent run be?
A dryer vent should not exceed 35 feet in length. Furthermore, for every 45 degree turn of a dryer vent you should remove 2.5 feet in total allotted length. For every 90 degree turn, you should remove 5 feet in total allotted length.
How far can a dryer vent run horizontally?
The required length of horizontal dryer vent pipe, from the dryer to the wall opening, is a minimum length of 12 inches and maximum of 25 feet.
How long can a flexible dryer vent be?
The maximum length of the duct is reduced by 2.5 feet for each 45 degree bend and by 5 feet for each 90 degree bend. The transition duct is not included in the exhaust duct maximum length. Vents can’t be longer than 35 feet and should be straight.
Can you run a dryer vent vertically?
You can vent a dryer vertically as long as you don’t exceed a distance of 35 feet in length. The preferred way to vent a dryer is downward or laterally but vertically is indeed an option. There are also special considerations to keep in mind when running a dryer vent vertically.
Can a dryer vent be too short?
How short can a dryer vent hose be? While there is a maximum allowed length for dryer vent hoses (35 feet), there is no minimum length. A dryer vent hose needs to be long enough to properly vent a dryer to the outside.
What is code for a dryer vent?
Dryer venting systems are covered in the International Residential Code (IRC) at M1502 – Clothes Dryer Exhaust.
Can I use PVC pipe for dryer vent?
Currently, PVC, Vinyl, or aluminum foil material is still common in plumbing applications. However, manufacturers do not permit their use for venting a dryer. PVC or Vinyl duct trap can easily melt because of the hot air coming from the dryer.
How close can dryer be to wall?
It’s ideal to have around six inches of space behind your washer and dryer. A periscope dryer vent can save space behind the dryer.
How high can my dryer vent be?
Set the vent a minimum of 12 inches above the outside ground. Pro tip: Use no more than 25 feet. of 4-inch duct, and subtract 5 feet for every 90-degree turn and 2 1/2 feet for every 45-degree turn for dryer vent installation.
Does dryer vent need to be sloped?
A best practice is to have the exhaust terminal located so that the exhaust duct will run horizontally with a slightly downward slope (1/4-inch per foot) to reduce the possibility that condensation will form. The hood opening should point downward and should be at least 12 inches above the ground.
Is it better to vent a dryer up or down?
It’s fine for the dryer vent to rise vertically to enter the building ceiling, but within the ceiling the vent should slope downwards towards its exit point at the building exterior wall.
Can you reduce dryer vent to 3?
The most aesthetically pleasing option is to have a 90deg turn out of the dryer, then into a 3″ pipe that goes for 9 feet. There is another option that would have a 90 degree turn, vertical for 4 feet, another 90 degree turn and then 9 feet out through a 4″ pipe.
Should dryer vent pipe be insulated?
DRYER DUCTS DON’T NEED TO BE INSULATED. Insulation will help prevent the moisture in the exhaust air from freezing inside the pipe, which would later lead to condensation and potential moisture problems when the pipe warms up and the ice melts.
Can a dryer vent cause a fire?
If you let that accumulate in your dryer vent over time, you could run into problems. If your dryer vent is blocked, all of this built-up lint can become a fire hazard. The heat from your dryer could cause the lint to combust, potentially catching your dryer and parts of your home on fire.
Can you vent dryer into garage?
You shouldn’t vent your dryer into a garage because the exhaust from gas dryers contains carbon monoxide, which can be fatal if allowed to build up in your home. Other issues that could crop up include lint buildup, mold infestation, and structural damage.
Can a dryer vent go through the attic?
The International Residential Code allows you to run a dryer vent through the attic, but you can’t terminate it there. Doing so would fill your attic with warm, moist air that could rot the framing and ruin the attic insulation, and lint from the dryer could create other problems.
Can you extend a dryer vent hose?
Ideally a vent hose should be as short as possible. Vent hoses are designed to be a specific length by the manufacturer. It will be technically possible to somehow connect two vent hoses together or otherwise extend its length.
Can you extend dryer vent outside?
A clothes dryer’s vent hose is important because it allows the moisture, heat and small pieces of lint generated from the laundry load to escape outdoors. Extending the dryer hose is possible, but for it to be safe there are several factors that must be taken into account.
