Table of Contents
A basic rule of thumb for DIY deck builders, homeowners, and professional contractors is that roughly 48 hours is an adequate drying time for a newly washed deck.
How do I know if my deck is dry enough to stain?
To determine if pressure treated wood is dry enough to stain, try the “sprinkle” test. Sprinkle water on the wood: if the wood absorbs it within 10 minutes, plan to stain as soon as possible. If the water beads or pools on the wood surface, the wood needs more time to dry.
How long after washing deck Can I stain it?
Always make sure the deck is clean and dry before you begin staining. Wait at least 24 hours after washing your deck to apply stain. Also, try to avoid staining your deck right before it rains. Most stains require at least 2-3 hours for drying.
How long does deck wood need to dry before staining?
Depending on the wood and drying conditions, you should usually wait 4 to 8 weeks after installation before staining a deck.
Can I just power wash my deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How many dry days do you need to stain a deck?
You will want to set aside a minimum of two days, including drying time. If your deck needs to be power washed, or if the boards on the deck need replacing, you may want to set aside another extra couple of days. Be sure to have all of your supplies ready well ahead of time.
Can you pressure wash and stain a deck in the same day?
After a deck has been power washed it will have some retained moisture within the wood. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining. Decks that don’t get much sun should be given an extra day to dry out.
What if it rains after I stain my deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
What happens if I stain wet wood?
Most wood stains are oil-based and therefore will not bond well to a wet surface. If applied to wet woods, the stain will be thin and will eventually wash off after a few sizable rains. Certain water-based stains will be more effective but will produce inferior results when compared with stain applied to dry wood.
How long does it take to power wash a deck?
When pressure washing, saturate the deck with deck detergent, give it 15 minutes to work, then begin power washing. Follow the operating directions for your power washer. After completing the deck power washing, wait 24 to 36 hours before applying sealer. If the weather is cool or humid, wait 48 to 72 hours.
What if it rains 12 hours after staining deck?
It Rained Shortly After Staining my Deck It is best to never stain any exterior wood when inclement weather is forecasted, especially rain. Most deck stain brands will warn against the application of their product within 12-24 hours of rain being forecast. You cannot do much until it stops raining once it starts.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
What temperature should it be to stain a deck?
If you’re staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren’t in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.
How do you prepare a weathered deck for staining?
How-To Prepare a Deck for Staining Thoroughly sweep the deck to remove all leaves and other debris. Liberally apply cleaner using a roller or pump sprayer (wear protective equipment to avoid contact with skin and eyes). After 15 minutes, work the cleaner into the surface using a stiff synthetic-bristle brush.
Why you shouldn’t powerwash your deck?
Wood decks are especially vulnerable to power washing, because the pressure exerted by the power washer can lead to splintering. If there is any area on the deck where the wood is already beginning to split apart, power washing it will exacerbate the problem and cause the split area to expand.
Is it better to sand or power wash a deck?
DO sand your deck before sealing. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
