Table of Contents
Quarter-Round Molding The pieces are commonly made of wood, have a curved edge and are shaped like a quarter of a circle in cross section, as the name implies. The standard width and height of quarter-round pieces is ¾ inch. They are in long strips, up to 7 feet and more, which are cut to measure for installation.
How do you calculate quarter round?
Measure the width of each archway and doorway, and add together. subtract the total of the doorway widths from the room perimeter to determine the total required length of wall trim and quarter round molding.
Are there different sizes of quarter round?
The quarter round comes in a variety of sizes, which makes it versatile enough for a wide range of applications, as well as an ideal solution for eliminating the gap between trim and moldings and to fill corners.
How do you measure linear feet for quarter round?
Divide the total number of inches by 12 to convert from inches to linear feet. For example, if your wall measured 40 inches in length, and you are installing molding on the top and bottom, 40 x 2 = 80 inches. Divide 80 by 12 to get 6.66 linear feet.
Is quarter round dated?
Quarter round molding is often the default standard molding among contractors, but it looks cheap and dated. Be sure to specify an alternative, such as a flat molding. Most contractors will be more than happy to accommodate. Quarter round molding is, literally, a quarter of a dowel.
Is shoe molding the same as quarter round?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.
How big of a gap will quarter round cover?
Quarter Round: A quarter round molding is one of the most common types of molding you’ll come across. It’s typically ¾” inches by ¾” inches and is used to cover the expansion gap between the floor and a wall, baseboard, or toe kick.
Should you paint or stain quarter round?
If you are laying quarter round or shoe molding on hardwood floors, you should lay a quarter round or shoe molding that matches the floor wood grain & stain. If you are laying quarter round on a ceramic, vinyl, or stone tile floor, you should paint the quarter round to match the baseboard molding.
Can I glue quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
What nails do you use for quarter-round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way — with a hammer.
How much is 32 linear feet?
2×4 boards: 8 feet times 4 boards = 32 linear feet.
How much should I charge for baseboard installation?
The labor cost to install baseboards is $4.90 to $7.75 per linear foot. Baseboard materials are pretty inexpensive (only about $0.80 to $1.20 per linear foot).
Which is more linear feet or square feet?
Linear Feet. The difference between square footage and linear footage is exactly what it sounds like. Square footage measures the area of a space in a square, two-dimensional way. As mentioned above, linear footage is measured in a single line and is usually used in reference to floor space.
How do you measure for a 45-degree cut?
How to Mark Miter Cuts. Miter cuts are angled crosscuts, which most often measure 45 degrees. For a 45-degree cut, measure to the long end of the miter, and set your combination square or layout square on the mark. Draw the cut line.
Do you caulk between quarter round and floor?
To Install Quarter Round Use Nails Not Caulk Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future.
Should baseboards touch the floor?
Baseboards should only touch the floor if you have no plans to carpet your floors and if you’ve already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you’ll need to take into account the height of the installed flooring.
Do baseboards need quarter round?
If you’ve been looking at baseboard finishing trim, you’ve probably discovered quarter-round, too. While quarter-round can be installed along the bottom of baseboard, trim carpenters and homeowners tend to prefer the sleeker look of shoe molding, which is taller and narrower than its curved counterpart.
Do I need quarter round for laminate flooring?
No you never need to use quarterround. I try to do all installs without using it.
What type of baseboards are in style?
Solid wood finger jointed wood, and MDF (medium-density fiberboard) baseboards are among the most popular material choices. Choosing the material often comes down to budget or color preference, so it’s easier to determine which material is right for your house.
